User's Manual

KDC User Manual

Revision 3.05.R6

File Menu 5.2

5.2.1 Connect to KDC

The KDC connects to a COM port automatically when connected to your PC’s USB port.

You can manually assign the KDC COM port using KTSync

Connection submenu under

File menu if needed.

 The COM port assignment is found in the Windows Device Manager.

 KTSync

will not connect to the KDC if it is in KDC Menus. You must EXIT

from the KDC Menus.

 If KTSync

fails to connect automatically to the KDC, please follow these

directions.

1. Exit KTSync

2. Check that you have connected the KDC to a USB port on your PC.

3. Make sure to use the cable provided with the KDC.

4. Check that the KDC is not in KDC Mode Menu.

5. Restart KTSync

Note:



You can manually assign the COM port using KTSync

Connect option

under the File menu

Figure 19 - COM Port Selection for KDC