User's Manual

KDC User Manual
62
Revision 3.05.R6
Copyright ® 2014, KoamTac, Inc.
5.3.1 Destination of Data
When barcode data is uploaded to the host device, you must assign a destination for the
data. Destination of Data options include:
 File - This option means data will be saved in the assigned filename. You can select a
different target directory by clicking the New icon. C:\MyData\sn_timestamp.txt is
the default directory. If this directory is not created, you will be prompted to create it
before data can be uploaded to a file.
 Active Window - This option means scanned barcode data is sent directly to the
active program running on your device as if the data was being entered directly from
a keyboard.
 Microsoft Excel - This option means barcode data is being imported directly into
Microsoft’s Excel. Various parameters can be set when uploading data to Excel.
 Select from Current Running Application – This option allows you to select a
currently running application for data synchronization.
Note:
 Data synchronization begins immediately if Automatically After Connection
is selected. If not selected, data synchronization is started manually by the
user.
 Users SHOULD NOT operate the PC during the synchronization process. It
can interrupt the process causing unreliable results .
5.3.2 Synchronization Methods
Fast Synchronization in Burst Mode
The KDC can synchronize data to a host device in Burst mode or Sequential mode. Burst
mode provides the fastest synchronization process but could result in error in a poor
Bluetooth environment. Fast synchronization in burst mode is only recommended with
USB connection.
Synchronize Normal Data
The KDC will synchronize Normal Data only in KDC memory if Synchronize Normal Data
option is selected. If you want all data in KDC memory synchronized, you should select
Synchronize Normal Data and Synchronize Application Data.
Synchronize Application Data
The KDC will synchronize Application Data only in KDC memory if Synchronize
Application Data option is selected. If you want all data in KDC memory synchronized,
you should select Synchronize Normal Data and Synchronize Application Data.