User's Manual

KDC User Manual
67
Revision 3.05.R6
Copyright ® 2014, KoamTac, Inc.
5.4.1 Select Symbologies and Symbology Options
The process for scanning and reading barcodes is delicate and complicated. Although
your KDC is equipped with a high performance scan engine, if configured incorrectly it
may not perform at its peak performance level. To ensure its high performance, the KDC
comes configured to optimize its scan engine technology. Unless you clearly understand
the impact of your changes to the KDC settings, please do not change factory default
settings. Please refer to Appendix A for details. Pressing the Default icon will reset all
symbology related options to factory default settings.
5.4.2 Data Editing Option
Prefix - Allows you to add a prefix to scanned data which can then be stored in KDC or
wedged to the host. The Prefix format must be defined in the data format menu of
KTSync. The maximum length for a Prefix is 11 characters.
Note:
 This Prefix option is different from the Prefix option in KTSync which
appends the prefix to data during synchronization.
Suffix - Allows you to add a suffix to scanned data which can then be stored in KDC or
wedged to the host. The Suffix must be defined in the data format menu of KTSync. The
maximum length for a Suffix is 11 characters.
Note:
 This Suffix option is different from the Suffix option in KTSync which
appends the suffix to data during synchronization.
AIM ID - Allows you to add AIM ID to scanned data which can then be stored in KDC or
wedged to the host. AIM ID must be defined in data format menu of KTSync. AIM ID is
either added to the end of Prefix or Suffix.
Partial Data : Allows you to display and store partial data. User defines the start position
and number of characters to be displayed and stored.
 Select the x characters from y position
 Set Partial Data Start Position to y , Partial Data Length to x, Partial Data
Action to Select
 Partial Data Length 0 means Select all characters from y position.