User's Manual

KDC User Manual
68
Revision 3.05.R6
Copyright ® 2014, KoamTac, Inc.
 Erase the x characters from y position
 Set Partial Data Start Position to y , Partial Data Length to x, Partial Data
Action to Erase
 Partial Data Length 0 means Erase all characters from y position.
Other Settings 5.5
Other options under the Settings menu allow you to select four additional settings.
 Ask Confirmation before Trying Auto Connection prevents unintentional launch
of KTSync.
 Ask Confirmation before Starting Auto Synchronization prevents unintentional
synchronization of data.
 Minimize KTSync on Start will minimize KTSync and send to the tray upon
execution.
 Keep Checking Bluetooth Connection allows reconnection of KDC once
Bluetooth signal is detected. This feature is useful when moving from Bluetooth
host device frequently. KTSync will automatically reconnect Bluetooth
connection when you enter an effective Bluetooth network range.
To select any of these settings, click on the box to the left of the setting. A check mark ()
will display next to the setting to indicate that it is selected.
Figure 24 - KTSync
®
Confirmation Settings