User's Manual

KDC User Manual

Revision 3.05.R6

iPad/iPhone/iPod touch KTSync 5.9

The KTSync for iPad/iPhone/iPod touch provides limited functionality of PC KTSync for

iPad, iPhone and iPod touch users.

1. The KDC supports SPP and iPhone Bluetooth profiles.

2. The iPhone/iPad/iPod touch should use iPhone Bluetooth profiles. iPhone is

the default profile of KDCi models.

3. Download the KTSync program from the App Store.

4. Enable the iPhone/iPad/iPod touch Bluetooth power from the Setting >

General > Bluetooth menu.

Note:



Users have to disable MFi option in System > MFi menu to use HID

Bluetooth profiles.



Users have to RESET the iPhone/iPad/iPod touch to change “HID to iPhone

mode” or “vice versa” after removing previous KDC connection.



KDC with Bluetooth Spec2.1+EDR doesn’t prompt Pin code entry menu.

5.9.1 KDC20i connection using iPhone mode

1. Download and install iKTSync from the Apple App Store.

http://itunes.apple.com/us/app/ktsync/id372916602?mt=8

2. Press the two KDC side buttons together to enter menu mode

3. Scroll down to Bluetooth menu using KDC Down button

4. Press the front middle scan button

5. Scroll down to Discovering and press the front middle scan button

a. “Discovering Started …” message will be displayed on KDC screen

b. Discovering will take about 30 seconds.

6. Select discovered iPhone/iPod touch device name and press the front

middle scan button

a. [Pin Code] User Default/Enter PinCode will be displayed

b. Press the front middle scan button to select the Use Default option

c. The message “Connecting to iPhone/iPod touch device name” will be

displayed

d. iPhone/iPad/iPod touch will ask for the PIN number.

f. Please enter “0000” and hit “connect” icon

g.“iPhone Connected” message will be displayed

7. Launch KTSync and configure Settings