User's Manual

KDC User Manual
80
Revision 3.05.R6
Copyright ® 2014, KoamTac, Inc.
Synchronization Options
 Synchronize KDC clock
KTSync will set the KDC’s date and time with Mac PC date and time when
the KDC is connected to Mac if this option is enabled.
 Burst synchronization
KTSync will synchronize barcode data from KDC in the burst mode if this
option is enabled. Otherwise, KTSync will synchronize barcode data one by
one. This option is enabled by default and can’t be disabled.
 Synchronization on connection
If this option is enabled, KTSync will automatically synchronize barcode data
from the KDC when the KDC is connected.
 Clear KDC memory after synchronization
KTSync clears barcode data stored in the KDC’s memory once
synchronization has
finished if this option is enabled.
 Append data to file
KTSync appends synchronized data to existing file specified on destination. If
file doesn’t exist then KTSync creates a new file.
Data Edition
 Attach serial number
The KTSync would add a KDC serial number to barcode data if this option is
enabled. This option is enabled by default and can’t be disabled.
 Attach time stamp
The KTSync would add timestamp to barcode data if this option is enabled.
This option is enabled by default and can’t be disabled.
 Attached barcode type
The KTSync would add barcode type to barcode data if this option is
enabled. This option is enabled by default and can’t be disabled.
 Serial number
When Attach serial number is enabled, this option determines when to
attach serial number. “Start of record” means to attach at the front of record
and “End of record” means to attach to the end of record.
 Data order
This option specifies the order of data (Barcode Type, Barcode Data and
Timestamp) in the record.