User's Manual

KDC User Manual BLUETOOTH
110
4. Bluetooth -
KDC20/30/200/250/270/300/350/400/470/500
The KDC20/30/200/250/270/300/350/400/470 supports HID (Human Interface Device)
normal, HID iOS, SPP (Serial Port Profile) and SPP2.0 profiles. The KDC500 supports
SPP only. The KDC20i/30i/200i/250i/270i/300i/350i/400i/470i/500i supports MFi (Made
for iPhone/iPad/iPod touch) profiles too. They are compatible with the following
Bluetooth stacks:
 BlueSoleil
 Broadcom (Widcomm)
 Microsoft Windows XP, Vista, 7, 8, 10, and Mobile 5.0+
 Toshiba
For PCI PTS compliance, KDC500 can support only SPP and MFi profiles.
The KDC200/250/270/300/350/500’s Bluetooth options may be configured by using the
KDC menu, PC KTSync and special barcodes. The KDC20/30/400/470’s Bluetooth
options may be configured by using the PC KTSync and special barcodes.
4.1 Bluetooth Config
Connect Device
The KDC supports both Serial Port Profile (SPP) and Human Interface Device Profile
(HID). The user may choose amongst SPP2.0, SPP (2.1), HID normal, or HID iOS profiles
to communicate with the host device. An additional MFi (Made for iPhone/iPad/iPod
touch) option is available for KDC20i/30i/200i/250i/270i/300i/350i/400i/470i/500i models
when MFi mode is enabled.(SystemConfig Menu). KDC500i doesn’t have MFi mode
option and supports MFi by default.
If the BT Toggle option(KDC500 doesn’t support) in BT Config is enabled, the user may
connect and disconnect the Bluetooth connection with the host device by pressing the
UP and DOWN buttons. It normally takes 3 seconds to connect and 1 second to
disconnect. This is a very useful feature for iPhone and iPad applications.
Note