User's Manual

KDC User Manual BLUETOOTH
112
Bluetooth power by pressing the SCAN button for the PWR On Time option value.
KDC500 doesn’t support this option.
Auto Power Off
The Auto Power Off option works in conjunction with the PWR Off Time option. This
option Enables the KDC to power off Bluetooth automatically when the KDC is NOT
CONNECTED to the host for the time duration specified in the PWR Off Time option.
KDC500 doesn’t support this option.
The default for this option is disabled. It is strongly recommended to keep it enabled to
maximize the operation time of the KDC. If Auto Power Off is Enabled, Bluetooth may
be manually powered off before the specified time in the PWR off time option.
It is recommended to enable ‘Auto Power On’ option if this option is enabled. User
doesn’t need to turn on the Bluetooth power manually with this configuration.
Beep Warning
The KDC beeps to warn user to power off the Bluetooth if this option is enabled with
five short beeps when the following condition meets..
1. Bluetooth power is ON
2. KDC is disconnected
3. Auto Power Off is DISABLED
KDC500 doesn’t support this option.
PWR OFF Time
The PWR Off Time option works in conjunction with the Auto Power Off option. If Auto
Power Off is Enabled, the KDC powers off Bluetooth when the duration of time
specified in the PWR Off Time option is met and the KDC is NOT CONNECTED to the
host. The time setting for this option is from one (1) minute to 30 minutes. The default
is five (5) minutes. KDC500 doesn’t support this option.
PowerOFF Msg
The KDC sends a Bluetooth power off message “BTOFF” to the host when KDC is
connected from host if this option is enabled. KDC500 doesn’t support this option.
MAC Address
The user may verify the KDC Bluetooth MAC Address.