User's Manual

KDC User Manual SYNCHRONIZATION
133
Action to Select.
 Partial Data Length 0 selects all characters from y position.
 Erase the x characters from y position
 Set Partial Data Start Position to y , Partial Data Length to x, Partial Data
Action to Erase.
 Partial Data Length 0 erases all characters from y position.
5.4 Other Settings
Other options under the Settings menu allow the user to select four additional settings:
 Ask Confirmation before Trying Auto Connection prevents unintentional
launch of KTSync.
 Ask Confirmation before Starting Auto Synchronization prevents
unintentional synchronization of data.
 Minimize KTSync on Start will minimize KTSync and send it to the tray upon
execution.
 Keep Checking Bluetooth Connection Enables reconnection of KDC once
Bluetooth signal is detected. This feature is useful when moving to or from
Bluetooth host device frequently. KTSync will automatically reconnect
Bluetooth connection when the user enter an effective Bluetooth network
range. (Not Available on KDC100)
To select any of these settings, click on the box to the left of the setting. A check mark
() will display next to the setting to indicate that it is selected.
Figure 26 - KTSync
®
Confirmation Settings