User's Manual

153
Step 1 of the custom application. Below is a description of each field. These prompts
are the same when selecting Generate step 2 and Generate step 3.
The custom application may include only Step 1.
 First line
Enter up to 13 characters; these will display on the first line of the KDC.
 Second line
Enter up to 13 characters; these will display on the second line of the KDC.
 Starting quantity
Enter a predefined start quantity for each scanned barcode. The start
quantity may be defined from 1 to 128. Use the up or down side key to
choose the desired quantity.
 Waiting to scan
Enter the number of seconds the KDC pauses before the user prompts
display. During this timeout period, the user may modify the quantity. If this
field is set to zero, the quantity field may not be adjusted. This field may be
defined from “-1” to “30” seconds. “-1” second enables infinite waiting of user
quantity input.
 Enable data filter
Check this box to enable the data filtering option. Data filtering enables the
user to predefine different aspects of the barcode data the user are
collecting.
Data Filter Settings
When the user select Enable data filtering, the user must click on the Settings button to
select the Data filter setting. The options for the Data filter settings are the same for
Step1, Step 2, and Step 3.