User's Manual

154
 Barcode Type
This field enables the user to select the type of barcodes the KDC will collect.
When the user clicks on the box, Select Symbols is enabled. A listing of the
symbologies supported by the KDC will display. To select a barcode
symbology, click on the box associated with the symbology.
 Minimum Data Length
This field enables the user to define the minimum length of the scanned
barcode. The length may be between 2 and 36 (1D models), 2 and 48 (2D
models) characters. If the user scans a barcode that has a length of less than
the defined length, the barcode data is not collected.
The default KDC minimum barcode length defined in scan option is
4. Therefore, users should change KDC minimum barcode length to
2 or 3 to define minimum data length to 2 or 3.
Figure 35 - Data Filter Settings
Note