User's Manual

KDC User YOUR KDC
48
3.2 Basics
Reading Barcodes
To read a barcode using the KDC, simply point the KDC at a barcode and press the
scan button. Be sure to point the scan engine window at the barcode, not at the user’s
face, and make sure to position the light beam on the barcode.
If a barcode has been successfully scanned, the user will hear one short beep and the
LEDs will illuminate green. The scanned barcode data will be displayed on the KDC
screen, along with the scan time and battery level. Depending on the configuration of
the KDC, other information may also be displayed.
Figure 12 - Scanning barcodes using KTSync
Figure 11 - KDC Display