User's Manual

KDC User YOUR KDC

KDC Mode Menu

The KDC Mode Menu has two options – Normal Mode and Application Mode.

Normal

This is the default mode that provides basic barcode scanning. In normal mode,

barcode data may be manipulated directly through the KDC or through KTSync during

the synchronization process.

Application

This mode enables the user to run the user application created by the Application

Generation Tool, as described in Chapter 6 Application Generation.

View Data Menu

This menu option enables the user to view and/or delete barcodes stored in the KDC.

In the case of the KDC20/30, you may delete the last scanned barcode by pressing the

DELETE button on the right side of the unit.

Set Barcodes Menu

This menu lists all the barcode symbologies supported by the KDC and enables the

user to select the barcode symbologies to be scanned. For maximum scan

performance, you should select only the symbologies that you will be scanning. Please

refer to 10. Appendix A – 10.1 Symbologies for a detailed listing of symbologies

supported by the KDC.

Code Options Menu

The KDC supports various Code Options, including Transmission of Start and Stop

Characters, Symbology Conversion, Verification of Optional Check Character, and

Transmission of Check Digit. Please refer to 10. Appendix A – 10.2 Code Options for a

detailed explanation of each option.

Press the Delete button to delete the

last scanned barcode.

Figure 14 - Delete Function in KDC20/30