User's Manual

KDC User YOUR KDC
86
BT Config Menu – KDC20/30/200/250/270/300/350/400/470/500
The KDC supports Bluetooth Ver2.1+EDR. Before utilizing the advantages of Bluetooth
functionality with the KDC, the user should become familiar with Bluetooth connectivity
and its impact on the host environment.
To configure your KDC for Bluetooth functionality, you may use the KDC Menus.
Below is a listing of the Bluetooth options and their settings. The default settings for
these options have been set to increase the usability of Bluetooth technology without
compromising the KDC battery usage.
IMPORTANT: We strongly recommend NOT changing these settings until
the user has fully tested the Bluetooth connection between the KDC and
the host device.
For more detailed information regarding Bluetooth functionality with the KDC, please
refer to Chapter 4. BLUETOOTH.
ConnectDevice
You may choose the Bluetooth device type in this option.
 HID normal - KDC20(i)/30(i)/200(i)/250(i)/270(i)/300(i)/350(i)/400(i)/470(i)
 HID iOS - KDC20(i)/30(i)/200(i)/250(i)/270(i)/300(i)/350(i)/400(i)/470(i)
 SPP2.0 - KDC20(i)/30(i)/200(i)/250(i)/270(i)/300(i)/350(i)/400(i)/470(i)
 SPP - KDC20(i)/30(i)/200(i)/250(i)/270(i)/300(i)/350(i)/400(i)/470(i)/500(i)
 MFi - KDC20i/30i/200i/250i/270i/300i/350i/400i/470i/500i
Auto Connect
Enabled or Disabled(KDC500 doesn’t support)
Auto Reconnect
Enabled or Disabled
Auto Power On
Enabled or Disabled(KDC500 doesn’t support)
PWR On Time
Disabled, 1 to 10 seconds(KDC500 doesn’t support)
Auto Power Off
Enabled or Disabled (KDC250G/350G should use option in system menu)