User's Manual

KDC User YOUR KDC
90
 The KDC will bypass GPS data to the host if the bypass option is enabled.
 The KDC becomes a Bluetooth GPS receiver if this bypass data option is
selected.
 Acquire Test: Select to acquire GPS signal.
 Reset GPS: Reset KDC GPS module.
GPS Hot Key
The KDC250G/350G provides the following hot keys for convenient GPS operations:
 GPS Acquire Test Cancellation
 Users may cancel the GPS acquire test by pressing the SCAN button
during the test.
 GPS Data Append Cancellation
 Users may cancel GPS data append by pressing SCAN button if GPS data
is not available immediately.
 Users should hold the SCAN button for more than 3 seconds to cancel
GPS data append.
USB Mode Menu– 100M/200M/250M/270/300M/350
Disabled
When this option is selected, KDC enters into USB Serial mode.
USB Disk
This option enables the user to change to USB Disk mode and barcode data that KDC
scanned is stored into a file in flash disk when this option is selected.
KDC100M/200M/250M/300M/350 may be used as USB Disk with 4MB or 8MB space
and KDC270 may be used as USB Disk with 8MB space.
USB HID
When this option is enabled, KDC enters into USB HID mode.