User's Manual

KDC User YOUR KDC
95
Disconnect
 Disconnect from Server.
Auto Connect
 Enable/Disable KDC to reconnect to Server when it detects disconnection from
Server.
Send Stored
 Enable/Disable KDC to send stored data when sending a new read data.
Information
 Displays CDMA module firmware version, the CDMA number, MEID, and IP
address.
MSR Config Menu – KDC415/425/430/500
Power(KDC500 only)
 Turning MSR(Magnetic-Stripe Card Reader) on or off
 Options: Enabled/Disabled
Data Format(KDC415/425/430 only)
 Enables/Disables whether KDC415/425/430 sends with packet data or not.
 Options: Enabled/Disabled
Use Track
The user may select which track(1/2/3) data to read from the MS Card.
 Track 1 : Enabled/Disabled
 Track 2 : Enabled/Disabled
 Track 3 : Enabled/Disabled
Null Check(KDC500 only)
The user may select which track(1/2/3) data should not be null. When this option is
enabled for a Track and the read data is null, MS Card read fail occurs.