User's Manual

KDC User YOUR KDC
99
SystemConfig Menu
Memory Size (3.0+ version only, KDC500 doesn’t support)
The user may select how much memory to divide between normal data memory and
application database memory.
 The KDC will erase all stored data upon changing the partition size.
 The user should enter the following key sequence to change the partition.
 UP button + UP button + DOWN button + DOWN button + SCAN button
Memory Status
In this option, users may checks the number of stored barcodes and memory usage.
Reset Memory
In this option, users may reset KDC memory by erasing all stored barcodes,
applications, and BT registry. KDC500 only erase all stored barcodes.
Auto Erase
If enabled, this feature erases stored barcodes on the KDC once the ‘Buffer Full’
condition is reached.
Sleep Timeout
This option Enables users to set the amount of time the KDC waits before going to
sleep (when not being used).
Auto Power Off (KDC250G/350G)
 Bluetooth: Enabled/Disabled
 GPS: Enabled/Disabled
 Power Off Time:0(Never), 5, 10, 20, 30, 60, 120 minutes
Date/Time
In this option, users may set the date and time of the KDC, which may also be set using
KTSync.(except KDC500)
Battery
This option shows the current status of battery power level.
Version
This option shows the KDC firmware version and serial number.
KDC500 displays only firmware version.