User's Manual

KDC User Manual
35
Revision 3.05.R6
Copyright ® 2014, KoamTac, Inc.
Discovering
Discovering neighboring
Bluetooth
devices
Connecting to View Connect to Bluetooth device
HID Sync
USB Config-USB Serial Mode
(M model)
USB Mode USB Serial/USB Disk USB Serial
System
Config
Memory
Size(3.0
only)
0.5/3.5, 1/3, 2/2, 3/1, 4/0
N/A
Memory Status No. of Stored Barcodes
Free Memory Available
Reset Memory Memory(Empties Data)
Application Memory
Auto Erase Enabled/Disabled Disabled
Sleep Timeout Disabled, 1sec to 10minute(s) 5 second(s)
Date
/ Time
YYYY:MM:DD &
HH:MM:SS
Battery
Version
Button
Lock
Enabled/Disabled
N/A
Beep Alert /Beep Sound Enabled/Disabled Enabled
Beep Alert /Power On Beep
Enabled/Disabled
Enabled
Beep Alert /Beep On Connect Enabled/Disabled Enabled
Beep Alert /Beep On Scan Enabled/Disabled Enabled
Beep Volume Low/High Low
Mfi
( i-chip installed)
Enabled/Disabled
Enabled
Auto Exit Enabled/Disabled N/A
Port Status Enabled/Disabled N/A
Display Format Time & Battery / Type & Time /
Type & Battery / Memory Status /
GPS Data(KDC250 only)/Barcode
Only
N/A
Menu Barcode
Enabled/Disabled
N/A
Scrolling Enabled/Disabled N/A
Brightness 1 to 15 level(8 level) N/A
Factory Default
Table 2 – KDC30 Menu Options
3.3.1 Set Barcodes Menu
This menu lists all the barcode symbologies supported by your KDC and allows you to
select the barcode symbologies you will be scanning. For maximum scan performance,
you should select only the symbologies you are scanning. Please refer to 11. Appendix –
11.1 Symbologies for a detailed listing of symbologies supported by your KDC.
3.3.2 Code Options Menu
Your KDC supports various Code Options including Transmission of Start and Stop
Characters, Symbology Conversion, Verification of Optional Check Character, and