User's Manual

KDC User Manual

Revision 3.05.R6



Beep On Scan: Enables or disables beep sound when KDC is scanning.



Beep Volume: High or low.



MFi Mode (KDC30i): Enables or disables MFi mode. MFi mode supports SPP and

iPhone Bluetooth profiles. Non-MFi mode supports SPP, SPP2.0, HID iOS and HID

normal.



Vibrator: Enables or disables KDC vibrator.



Auto Exit: Enables KDC to automatically exit KDC Menus.



Port Status: Enables or disables KDC port messages.



Display Format: Selection of display format - Time & Battery, Type & Time, Type &

Battery, Memory Status and Barcode only



Scrolling : Enables or disables display scrolling for a barcode with more than 40

characters



Brightness: Adjusts display brightness



Factory Default: Resets KDC options to factory default settings.

3.3.8 Pair and connect KDC30iand iOS4.0+ in HID mode

Note:

• Users have to disable MFi option in System > MFi menu to use HID

Bluetooth profiles.

• Users have to RESET the iPhone/iPad/iPod touch to change HID to iPhone

mode, and vice versa, after removing previous KDC connection.

• KDC with Bluetooth Spec2.1+EDR doesn’t prompt Pin code entry menu.

• KDC with Bluetooth Spec. 2.1+EDR stack doesn’t require 4 or 6 digits PIN

digits entry

Follow the steps to pair and connect KDC models for MFi and iOS4.0 in HID mode.

1. Go to the KDC System > MFi menu.

2. Change MFi option to Disabled.

3. Change KDC to Pairing mode.

4. The iPhone/iPad/iPod touch will find a new device as Keyboard.

5. Click Keyboard device.

Note:

• Please skip the following steps if iPhone/iPad/iPod touch doesn't ask for the

PIN number.

6. Click Keyboard device: The iPhone/iPad/iPod touch will ask for the PIN number. The

iPad will ask for 6 digits and the iPhone/iPod touch will ask for 4 digits.