User's Manual

KDC User Manual
45
Revision 3.05.R6
Copyright ® 2014, KoamTac, Inc.
LED Status 3.4
Table 3 - Explanation of LEDs
Empty Battery 3.5
• Under 30% - Orange LED flickers at 1-second-interval for 5 seconds every minute.
• Under 20% - Orange LED flickers in 1- second-interval for 10 seconds every
minute.
• Under 10% - Red LED flickers in 1- second-interval for 10 seconds every minute
and you will hear beeping sound.
Buffer Full 3.6
KDC30 Users will hear a beep when the size of collected data reaches 160KB (85 version)
/ 60KB (86 version) or the number of collected barcodes is 10,240. To prevent the loss
of data, you should synchronize the data then reset the memory when this message
displays.
Power-on/off 3.7
You can turn the power on and off by pressing DOWN and SCAN button simultaneously
for 5 seconds. When the LED light is in green, you can release the buttons and the
LED Color
Status
Green
 Successful Reading
 USB is connected and battery is fully
charged
 iPhone mode in pairing mode
Orange
 Low battery
 USB is connected and battery is charging
 HID mode in pairing mode
Red
 No reading
 SPP mode in pairing mode