User's Manual

KDC300 User Manual
10
2.4 Basic Operation
Reading barcodes
Point KDC300 to the barcode and press the scan button.
A high beeper tone will be heard and the front panel LED will illuminate in green upon a successful scan.
A low beeper tone will be heard and the front panel LED will illuminate in red upon an unsuccessful scan.
The scanned barcode will be displayed, along with time stamp and battery level.
KDC300 provides two additional display format including barcode type & time, and barcode type and
battery.
When the barcode cannot be read, try the following:
z Check if the width of barcode label does not exceed the width of the light beam.
z Change the angle between the barcode and KDC300.
z Change the distance between the barcode and KDC300.
z Check option settings defined in KDC300 menu section.
Upload barcode data to PC.
Use the included KTSync synchronization program to upload barcode data from KDC300 to your PC.
Please refer to Chapter 4 for the details of Synchronization process.