User's Manual

KDC300 User Manual
11
2.5 KDC300 Menus
User can access menu selection mode by pressing both buttons on the left side of KDC300
simultaneously. The table below summarizes KDC300 menus. Please refer to Chapter 4 for the details of
each option.
Note
User should set KDC300 optional parameters properly for the best
scanning result.
z Set proper security level. To increase the reliability ,user can set the security level to a number
higher than 1 (the default value) up to 4. If the security level is n, then the decoder will keep
reading the barcode until it decodes the same value n times.
z Select only necessary barcodes to increase the reliability further.
z Maximize the minimum barcode length. Small barcode length such as 2 or 3 can result in some
errors.
Level 1 Level 2 Level 3 Level 4/Note
Normal Standard KDC100
Mode
Onetime Onetime Barcode
Comparing Mode
Continuous Continuous Barcode
Comparing Mode
KDC Mode
Collation Select comparing digits
View Data View/Delete Review and delete stored data