User's Manual

KDC300 User Manual
19
View Data Menu
User can browse and delete scanned barcodes in View Data menu if there are stored barcodes in
KDC300.
Set Barcodes Menu
KDC300 supports most of the popular barcode symbologies. However, it is important to select only the
required symbologies to provide the best scan performance. Please refer Honeywell 5x80 User Manual
for the details of supporting symbologies.
Barcode Options Menu
KDC300 supports various barcode options including transmission of start and stop characters, symbology
conversion, verification of optional check character, and transmission of check digit. Please refer
Honeywell 5x80 User Manual for the details of each option.
Scan Options Menu
z Timeout: User can set scanning timeout up to 10 sec. Default timeout is 2 sec.
z Minimum barcode length: User can set the smallest barcode size up to 36. It is strongly
recommended to maximize the minimum length to prevent possible wrong readings. Default is 4.
Data Process Menu
Wedge/Store - KDC300 provides five modes of data transmission.
z Wedge Only: KDC300 doesn’t store scanned barcode in the memory and just transmits it to the
host
z Wedge & Store: KDC300 stores scanned data in the memory and transmits it to the host
z Store Only: KDC300 stores scanned data in the memory but doesn’t transmit it to the host.
z Wedge & Store if Sent: KDC300 stores scanned data in the memory if it transmits to the host
successfully
z Wedge & Store if Not Sent: KDC300 stores scanned data in the memory if it fails to transmit it to