User's Manual

KDC300 User Manual
20
the host
Data Format
- KDC300 provides two data formats
z Barcode Only: KDC300 transmits scanned barcode only. User may incorporate proper data
transmission error detection and correction mechanism in this mode.
− KDC300 supports various terminations characters for barcode only format
− User can select <NONE>, <CR>, <LF>, <CR+LF> or <TAB> as the termination
character
z Packet Data: KDC300 transmits packet data with checksum to minimize transmission error.
KTSync program operates in Packet Data mode and user shouldn’t change this option while
using KTSync program.
Handshake
- KDC300 provides handshake mode when sending packet data
z Handshake mode will increase the reliability of packet data transmission.
z The default is disable handshake mode.
Terminator
– KDC300 supports various termination characters when KDC300 wedges barcode in data
only format.
z User can select <NONE>, <CR>, <LF>, <CR+LF> or <TAB> as the termination character
when KDC300 wedges barcode in data only format.
Bluetooth Menu
KDC300 supports a wide range of Bluetooth features to increase usability as well as to minimize the
power usage. Please refer to Chapter 3 for details on Bluetooth functions.
System Menu
z Memory Status: User can check the number of stored barcodes and memory usage in this menu.
z Reset Memory: This menu enables user to erase all stored barcodes.
z Sleep Timeout: KDC300 goes to sleep mode after scanning barcode to minimize the power
consumption. Default sleep timeout is 5 sec.
z Date/Time: User can set current date and time in this menu. KTSync program also provides
automatic date and time synchronization with PC date and time function.
z Battery: This menu shows the current status of battery power level.