User's Manual

KDC300 User Manual

3.7 Auto Connecting KDC300 to Host Device on

Power On

KDC300 can be connected to host device automatically upon Power On Bluetooth if Auto Connect is

Enabled. The default is Disabled and discouraged to use this feature unless fully tested with host device.

Some host devices do not support this feature and will result delay and power loss if Enabled but not

connected automatically.

3.8 Beep Warning

KDC300 beeps the Bluetooth connection status.

z High short beep tone will be played once Bluetooth is connected.

z Low short beep tone will be played once Bluetooth is disconnected.

KDC300 will beep 5 times with short beep if

z “Beep Warning is ENABLED” and

z “Auto PowerOff is DISABLED” and

z “KDC300 is DISCONNECTED from HOST” and

z “Bluetooth power is ON”.

KDC300 will beep for one second if Bluetooth power becomes OFF by Auto PowerOff option