User's Manual

KDC300 User Manual

Current KDC Wedge Methods

This section shows current KDC300 Wedge/Store option under Data process menu. KDC300 can be

configured in one of the following five Wedge/Store modes:

z Wedge Only - The scanned data is transmitted to the host. KDC300 does not store scanned

data.

z Wedge & Store - The scanned data is stored in the KDC300 and transmitted to the host.

z Store Only - The scanned data is stored in the KDC300 and not transmitted scanned data to the

host.

z Wedge & Store if Sent - The scanned data is stored in the KDC300 if it is transmitted to the

host successfully.

z Wedge & Store if Not Sent - The scanned data will only be stored in KDC300 if the KDC300 is

unable to transmit to the host successfully.

Enable Wedge (Handheld scanner mode)

Enable Wedge (Handheld scanner mode) would be marked if either Wedge only or Wedge & Store

option is selected.

Keep Scanned Data in KDC

Keep scanned data in KDC would be marked if either Store only or Wedge & Store option is selected.