User's Manual

KDC300 User Manual
6
2.2 Installation
Prior to installing the included software on your PC, verify that your system meets the minimum system
requirements.
1. Microsoft Windows operating system: XP or Vista
2. Free space on hard drive of 512 MB.
3. Accessible USB port for connecting KDC300 to your computer
4. 256M byte memory or larger.
Affix the neck strap to KDC300
Use the included neck strap properly to avoid dropping the unit.
Fit the small thin cord of the strap around the pillar of the KDC300 and loop the thick cord of the strap
through the thin loop in order to attach the neck strap.
Wear the neck strap when carrying the product to avoid dropping the unit.
Do not swing the product around on the strap, since contact with another object may damage the unit and
cause it to malfunction.
Copy the Provided Programs into your PC
Create a directory for KTSync program.
Copy the “KTSync.exe” program from the CD to the new directory on your hard drive.
It is recommended that you also copy “KTReader.inf” and “KDC300.User.Manual.pdf” into the same
directory.
Connect KDC300 USB connector to your PC
Connect KDC300 to PC USB port. Use the included USB extension cable if needed.
The “New hardware found” message will pop up.
Follow the prompts and select the option to search for the best driver for your device.
Please select the directory containing the “KTReader.inf” file and continue hardware installation
procedure.
A message will pop-up that new hardware is found and recognized as a serial device.