KDC User Manual Rev 2.85T.A3 (KDC20/30/410/411/415/420/421/425/430) 3.x7.A3 (KDC100/200/250/300/350/350WA/450) A0 01.05.08 (KDC500) Copyright © KOAMTAC Inc.
MQCOVCE EQO KDC User Manual INTRODUCTION Table of Contents WARRANTY POLICY 1. INTRODUCTION 1.1 KDC Package Contents ......................................................................................................... 21 1.2 KDC Characteristics.............................
MQCOVCE EQO KDC User Manual INTRODUCTION 3.3 KDC Menu ............................................................................................................................. 50 KDC Mode Menu .................................................................................................................... 62 View Data Menu .................................................................................................................... 62 Set Barcodes Menu ....................................
MQCOVCE EQO KDC User Manual INTRODUCTION Wakeup Nulls ......................................................................................................................... 93 Autolock Time ........................................................................................................................ 93 HID Keyboard ......................................................................................................................... 94 HID Initial and Inter-Character Delay ..............
MQCOVCE EQO KDC User Manual INTRODUCTION KDC20i/30i/200i/250i/300i/270i/350i/400i/500i connection using MFi mode ....................... 117 iKTSync Settings ................................................................................................................... 117 How to Connect and Reconnect MFi Mode using UP Keys..................................................... 118 How to use Keyboard Wedge with iKTSync ...........................................................................
MQCOVCE EQO KDC User Manual INTRODUCTION 10.3 Miscellaneous Barcode Information .................................................................................... 148 Height of a Linear Barcode ................................................................................................... 148 Check Characters ................................................................................................................. 148 Prevent Interleave 2 of 5 Partial Reading .............................
MQCOVCE EQO KDC User Manual INTRODUCTION 12.14 HID Auto Lock Time ........................................................................................................ 176 12.15 HID Keyboard .................................................................................................................. 177 12.16 HID Initial Delay............................................................................................................... 178 12.17 HID Character Delay ..................
MQCOVCE EQO KDC User Manual INTRODUCTION 13.5 Scan Timeout ...................................................................................................................... 205 13.6 Minimum Barcode Length (except KDC30) ......................................................................... 206 13.7 Image Capture (except KDC30) .......................................................................................... 209 13.8 ScanIfConnect .............................................
MQCOVCE EQO KDC User Manual INTRODUCTION 13.32 UHF (UHF Model Only) ................................................................................................... 242 13.33 USB Disk (M Model Only) ................................................................................................ 245 13.34 USB DM Button(KDC30 only) .......................................................................................... 245 13.35 WIFI (WIFI Model Only) .....................................
MQCOVCE EQO KDC User Manual INTRODUCTION 15.17 ICCR(IC CARD READER) ................................................................................................. 277 15.18 Key Management ............................................................................................................ 277 15.19 Multilanguage ................................................................................................................. 277 16.
MQCOVCE EQO KDC User Manual INTRODUCTION 18. APPENDIX H – PRODUCT SPECIFICATION 18.1 KDC470 .................................................................................................................................
MQCOVCE EQO KDC User Manual INTRODUCTION Figure 24 - KTSync Synchronization Settings Figure 25 - Barcode & KDC Settings, Symbologies, Data Editing and Scan Options Figure 26 - KTSync® Confirmation Settings Figure 27 - KDC Menu in KTSync
MQCOVCE EQO KDC User Manual INTRODUCTION List of Tables Table 1 - Features of KDC Table 2 - Number of hours required to fully charge a KDC Battery Table 3 - KDC Menu
MQCOVCE EQO KDC User Manual INTRODUCTION COPYRIGHT, LICENSE, and WARNING PAGE Copyright 2002-2016 by KOAMTAC, Inc. All rights reserved. No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means, without permission in writing from KOAMTAC, Inc. The material in this manual is subject to change without notice. KOAMTAC reserves the right to make changes to any product to improve reliability, function, or design.
MQCOVCE EQO KDC User Manual INTRODUCTION Regulatory Compliance US FCC ID: VH9KDC20, VH9KDC30, VH9KDC100, VH9KDC200, VH9KDC250, VH9KDC270, VH9KDC300, VH9KDC350, VH9KDC350WA, VH9KDC400, VH9KDC450, VH9KDC470, VH9KDC500A This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
MQCOVCE EQO KDC User Manual INTRODUCTION Europe 2200 0983 Certificate No.: EMC15688-07-01 Products intended for sale within the European Union are marked with a CE Mark which indicates compliance to applicable Directives and European Normes (EN), as follows. Amendments to these Directives or ENs are included: Normes (EN), as follows.
MQCOVCE EQO KDC User Manual INTRODUCTION Laser Compliance KDC20/100/200/250/270L/350L/410/411/415/470L Complies with US 21 CFR 1040.10 and 1040.11 except for deviations pursuant to laser notice no. 50, dated June 24, 2007 and IEC 60825-1 (Ed. 2.0) Complies with IEC60825-1:1993 + A1:1997 + A2:2001 Battery Warning x x x x x x x x This device contains a rechargeable NiMH. Never throw the battery into a fire, as that could cause the battery to explode.
MQCOVCE EQO KDC User Manual INTRODUCTION Apple® Made for iPhone, Made for iPod, Made for iPad Samsung® Compatible with Galaxy Series Warranty Policy KOAMTAC ONE YEAR LIMITED WARRANTY KOAMTAC products are warranted to be free from defects in materials or workmanship for one (1) year from the date of purchase from an authorized dealer of KOAMTAC products. Within this period, we will, at our sole discretion, repair or replace any components that fail in normal use.
MQCOVCE EQO KDC User Manual INTRODUCTION a traceable method of shipping for your protection. We will pay for shipping to return any product to you. Email us at rma@koamtac.com to obtain an RMA number. Once you have obtained the RMA number, please send us your purchased KOAMTAC product with the RMA number clearly marked on the outside of the package and on the shipping slip if you choose to use traceable carriers such as UPS or FEDEX. Shipping fees for returns are your responsibility.
MQCOVCE EQO KDC User Manual INTRODUCTION 1. Introduction Congratulations on purchasing a revolutionary KOAMTAC KDC. KOAMTAC’s KDC works with a wide variety of portable applications. Use it independently or as a PC, PDA, or smartphone/tablet accessory.
MQCOVCE EQO KDC User Manual INTRODUCTION 1.1 KDC Package Contents The standard KDC package contains: 1. One KDC 2. USB Cable z KDC20/30 (N/A) z KDC100/200/250/300/350 (8pin Ultra-mini USB Cable) z KDC270/400/450/470/500 (5pin Micro USB Cable) 3. One Lanyard (KDC20/30/100/200/250/300/270/350) or One Hand Strap (KDC400/450/470/500) 4. One KDC Protective Rubber Boot (KDC100/200/250/300). The following KDC accessories are available to purchase at koamtac.com or by contacting a local reseller.
KDC User Manual MQCOVCE EQO INTRODUCTION KDC20/30 Package Contents KDC100/200/250/300 Package Contents KDC400/450 /470 Package Contents KDC270/KDC350 Package Contents KDC350WA Package Contents KDC500 Package Contents
MQCOVCE EQO KDC User Manual INTRODUCTION 1.2 KDC Characteristics Before using the KDC, the user should become familiar with its physical characteristics. Refer to Figure 2, 3, 4, and 5 below. These figures indicate the placement of the SCAN, UP, DOWN and DELETE buttons, OLED display, LED, and ports on the KDC. Although KDC models consist of similar buttons and LEDs, each model has different characteristics for its own purpose of use.
MQCOVCE EQO KDC User Manual INTRODUCTION KDC100 Barcode Reader and Data Collector Green/Red/Orange LEDs OLED Display SCAN Button UP Button DOWN Button Ultra-mini USB Port Type A USB Swing Out KDC100 KDC200/250/300/270/350 Barcode Reader and Data Collector Green/Red/Orange LEDs OLED Display UP Button SCAN Button DOWN Button Ultra-mini USB Port KDC200 Green/Red/Orange LEDs UP Button OLED Display DOWN Button SCAN Button Ultra-mini USB Port KDC250/300
MQCOVCE EQO KDC User Manual INTRODUCTION Green/Red/Orange LEDs UP Button OLED Display DOWN Button Scan Button Ultra-mini USB Port KDC2700 Green/Red/Orange LEDs Function Button Menu %XWWRQ DOWN Button UP Button SCAN Button Shift %XWWRQ 0RGH %XWWRQ Keypad Ultra-mini USB Port KDC350 KDC400/450/470 Barcode Reader and Data Collector
MQCOVCE EQO KDC User Manual INTRODUCTION Green/Red/Orange LEDs UP Button Buzzer Hole DOWN Button Scan Button Micro USB Port KDC470 KDC500 Mobile POS 1D/2D Barcode Scanner Right SCAN Button Left SCAN Button OLED Display NFC Reader Green/Red/Orange LEDs Magnetic-Stripe Card Reader Secure Touch Keypad ICCR (IC Card Reader) Micro USB KDC500
MQCOVCE EQO KDC User Manual INTRODUCTION 1.3 Keypad Functionality for KDC350 Enables the user to enter or exit the KDC Menu. While in menu mode, press once to exit. Enables the user to change character input mode from capital letters to small letters, and vice versa. Enables the user to switch between ABC and number input mode. (UP button) (DOWN button) While in the KDC menu, press this button to go up on the selection bar.
MQCOVCE EQO KDC User Manual INTRODUCTION 1.4 Keypad Functionality for KDC500 (Menu/Down button) While in the KDC500 menu, press this button to scroll down the selection bar. While on the main screen, press this button for 5 seconds then the KDC500 will enter the KDC500 menu mode. While in the KDC500 menu, press this button to scroll up the selection bar. While on the main screen, press this button for 5 seconds then the KDC500 will enter the KDC500 BT Service menu.
MQCOVCE EQO KDC User Manual INTRODUCTION 1.5 Input data by using a keypad (KDC350) z When the KDC350 shows a blank main screen, you may start pressing numbers or characters of the barcode data that needs to be input. z See an example below: How to save the barcode data “123Koamtac”. 1XP 6KLIW $EF 6KLIW $EF B B Press 1@:/,2 2ABC and 3DEF on the keypad. . Press Mode to switch to Abc mode. Press 5JKL on the keypad 'R \RX ZDQW Cancel 7R FDQFHO "
MQCOVCE EQO KDC User Manual INTRODUCTION 1.6 Turn on the power of KDC20/30/350/400/500 KDC20/30/270/350/400/470/500 have power on/off switch. Please turn on the power first before using the device. KDC220/30 P Press SCAN and DOWN buttons simultaneously for 5 seconds. The user will hear a beep sound when it is turned on. 6&$1 %XWWRQ '2:1 %XWWRQ KDC2270 Press SCAN and DOWN buttons simultaneously for 5 seconds. The user will hear a beep sound when it is turned on.
MQCOVCE EQO KDC User Manual INTRODUCTION KDC55000 5LJKW 6&$1 Press Left and Right SCAN buttons simultaneously for 5 seconds. The user will see a KOAMTAC logo in the display and hear a beep sound when it is turned on.
KDC User Manual Installation 2. Installation 2.1 Bluetooth Pairing The KDC may read and store barcode data independently, but it may also be used in conjunction with a PC, PDA, or smart device. In order to read barcode data with your KDC wirelessly, the user must first pair the KDC and smart device via Bluetooth. If previously paired and no changes have been made in the smart device’s Bluetooth settings, the smart device will always recognize the KDC that has previously been paired.
KDC User Manual Installation KDC 20/100/200/250/270L/350L/410/411/415/470L/500L (1D) Bluetooth Profile SPP Bluetooth Profile HID iOS Bluetooth Profile SPP2.0 0QVG Bluetooth Profile MFi Bluetooth Profile HID normal For PCI PTS compliance, KDC500L supports only Bluetooth Profile SPP and MFi.
KDC User Manual Installation KDC30/300/270C/350C/420/421/425/450/470C/500C (2D) Bluetooth Profile SPP Bluetooth Profile MFi Bluetooth Profile HID iOS Bluetooth Profile SPP2.0 Bluetooth Profile HID normal 0QVG For PCI PTS compliance, KDC500C supports only Bluetooth Profile SPP and MFi. Some KDCs are equipped with an LCD screen (KDC100/200/250/300/270/350/500), the user may select a Bluetooth profile from the ConnectDevice menu as shown below.
KDC User Manual Installation Pairing First Option: Connect the KDC from a host (PC or Smart Device) This method is recommended for first-time users or when the user is only connecting a few KDCs. 1. Put the KDC into Pairing mode z Select the correct pairing barcode and scan below for your KDC model, or KDC 20/100/200/250/270L/350L/410/411/415/470L/500L (1D) KDC30/300/270C/350C/420/421/425/470C/500C (2D) Pairing z Select Pairing from the KDC menu.
KDC User Manual z Installation For the KDC500, press the FN button for five seconds in order to directly enter the BT Service menu while it is not in the sleep mode.
KDC User Manual Installation 2. On the host device, go to Settings -> Bluetooth, and select the KDC that needs to be paired. The KDC and host device will now communicate with each other. Settings Tap the KDC Tap Bluetooth 0QVG For PCI PTS compliance, KDC500 requires Numeric Comparison method. If the host device and KDC500 shows the same 6digit number, press Pair/YES button on each device. 3. After it has been installed, open KTSync and it will automatically find and connect to the KDC.
KDC User Manual Installation This method is recommended for advanced users or when the application or process requires the pairing of multiple KDCs to multiple host devices on a regular basis. 1. Find the Bluetooth MAC Address of the host device. Settings Tap on General Tap on About Bluetooth address Figure 6 - Finding Bluetooth MAC Address 2. Create the Bluetooth MAC Address Barcode according to the format below as an example based on “http://www.terryburton.co.uk/barcodewriter/generator/”.
KDC User Manual Installation 4. Connect the KDC to the host device by scanning the Bluetooth MAC Address Barcode. Settings Scan th the BT MAC Ad Address Barcode Tap on Bluetooth Tap on Pair Complete! Figure 7 - Connecting KDC with a smart phone by scanning Bluetooth MAC Address Barcode 5. Open KTSync after it has been installed, and it will automatically find the KDC and connect. (Refer to 2.
KDC User Manual Installation 2.2 KOAMTAC Installation Wizard Windows 7, 8 & 10 WARNING: DO NOT CONNECT KDC TO USB PORT PRIOR TO DRIVER INSTALLATION 1. Insert KOAMTAC Installation CD into the computer’s CD drive. 2. Click Start icon then My Computer icon. A list of devices on the computer will be displayed, including the disk drive containing the KOAMTAC Installation CD. 3. Click on the KOAMTAC Installation CD icon, then the Setup directory. Click on the PC_Setup.
KDC User Manual Installation 3. In the KTSync Installation Complete window, click Close and wait for the Device Driver Installation Wizard. 4. In the Windows Security window, click Install to complete installation. Connect KDC to Computer Using the USB cable included with the KDC or built-in swing out USB connector, follow the directions below. 1. Connect KDC to PC. 2. Wait until the computer beeps and/or displays the message Found New Hardware.
KDC User Manual Installation Verify COM Port Address z The installed COM Port may be verified in Device Manager. Android z Download and install KTSync from the Android Play Store. https://play.google.com/store/apps/details?id=com.koamtac.ktsync&hl z BlackberryDownload and install KTSync from the Blackberry App World. http://appworld.blackberry.com/webstore/content/16861?lang=en iPad/iPhone/iPod Touch z Download and install KTSync from the Apple App Store. http://itunes.apple.
KDC User YOUR KDC 3. Operating your KDC 3.1 Getting Started Attaching a Lanyard or Hand Strap to a KDC To prevent possible damage to the KDC, we STRONGLY recommend wearing it around the neck or hand, using the included lanyard or hand strap. In addition, the user should not swing the KDC by its lanyard or hand strap. Impact with another object may cause the KDC to malfunction or damage.
KDC User YOUR KDC Charge KDC Battery Prior to using the KDC, the user should charge the battery. Follow the instructions below. 1. Connect the KDC cable to the mini USB connector on the KDC. 2. Connect the KDC cable to the Type A USB connector on the computer. 3. The KDC battery will begin charging. Within a few minutes, the two small LEDs (three LEDs in case of KDC500) on the front panel will illuminate orange. When the battery is fully charged, the LEDs will illuminate green.
KDC User YOUR KDC Press the Button to access the KDC menu. Move the menu bar up and down by pressing the and Buttons, and configure the KDC by pressing the SCAN Button to select a menu. Figure 9 - Location and use of buttons on a keypad (KDC350) Press the Button for 5 seconds to access the KDC menu. Move the menu bar up and down by pressing the and Buttons, and configure the KDC by pressing the SCAN Button to select a menu.
KDC User YOUR KDC 3.2 Basics Reading Barcodes To read a barcode using the KDC, simply point the KDC at a barcode and press the scan button. Be sure to point the scan engine window at the barcode, not at the user’s face, and make sure to position the light beam on the barcode. If a barcode has been successfully scanned, the user will hear one short beep and the LEDs will illuminate green. The scanned barcode data will be displayed on the KDC screen, along with the scan time and battery level.
KDC User YOUR KDC z Modify the angle of the KDC in relation to the barcode, making the angle more wide or narrow as needed. (Laser Model) z Modify the distance between the barcode and the KDC, moving closer or further away as needed. z Check the option settings defined in the KDC menu section and change options as needed. z Check to see that the barcode’s width does not exceed the light beam’s width, and vice versa.
KDC User YOUR KDC Figure 13 - Location for reading NFC Tag 3. The KDC will show the NFC tag UID and the user will hear a short beep if it has been read successfully. Reading HF RFID Tags (KDC450/470) The KDC450/470 may virtually read any ISO/IEC 14443 A or B compliant smartcards, or ISO/IEC 15693 compliant HF RFID tags. To read a HF RFID tag, touch the RFID card to the back of the KDC450/470 case, and make sure the tag and case are within 5cm of each other.
KDC User YOUR KDC Read Integrated Chip (IC) Card(KDC500) 1. The paired host application sends a command to enable the IC Card Reader. 2. Insert IC Card into the IC Card slot located in the left side of KDC500. Make sure the IC of the card face to up. 3. The KDC500 will send the IC card data read to the paired host application. Synchronizing data to the host device Use the KTSync program to synchronize barcode data from the KDC to the host device. Please refer to Chapter 5. Synchronization for details.
KDC User YOUR KDC 3.
KDC User YOUR KDC Postal Codes OCR Barcode Options (20/100 /200/250/270 L/ /350L) CodaBar_NoStartSt opChars UPCE_as_UPCA EAN8_as_EAN13 UPCE_as_EAN13 ReturnCheckDigit VerifyCheckDigit UPCA_as_EAN13 Barcode Options (30/300/270C /350C) I2of5_VerifyCheckD igit Code39_VerifyChec kDigit I2of5_ReturnCheck Digit Code39_ReturnChe ckDigit UPCE_ReturnCheck Digit UPCA_ReturnCheck Digit EAN8_ReturnCheck Digit EAN13_ReturnChec kDigit Codabar Code39 I2of5 Code11 Code128 Telepen UPCA MaxiCode N/A Enabled N/A
KDC User YOUR KDC 5DgtAddenda( Enabled/Disab led) Req. Addenda (Enabled/ Disabled) Sep. Addenda (Enabled/ Disabled) Coupon Code (Enabled/ Disabled) Expand (Enabled/ Disabled) Req. Addenda (Enabled/ Disabled) Sep. Addenda (Enabled/ Disabled) Check Digit (Enabled/ Disabled) NumberSys(E nabled/ Disabled) 2DgtAddenda( Enabled/Disab led) 5DgtAddenda( Enabled/Disab led) VerifyChkDgt( Enabled/Disab led) 2DgtAddenda( Enabled/Disab led) 5DgtAddenda( Enabled/Disab led) Req. Addenda (Enabled/ Disabled) Sep.
KDC User YOUR KDC Long, Extra Long Finger Trigger Partial Display Data Process Wedge / Store Enabled/Disab led Start Position N/A N/A Enabled Enabled Enabled N/A Enabled Enabled 1 1 1 1 1 1 1 1 N/A 1 No.
KDC User YOUR KDC HID Ctrl Char BT Service Power Pairing Discovering Connecting to Disabled, Alt+Numpad, ^+Character, Replace to | Enabled/ Disabled Pairing neighboring Bluetooth devices Discovering neighboring Bluetooth devices View Connect to Bluetooth device Disabled Disabled N/A Disabled Disabled Disabled Disabled Disabled Disabled Enabled Enabled N/A Enabled Enabled Enabled Enabled Enabled Enabled Enabled/Disab led USB Serial/USB Disk/USB HID Enabled Enabled N/A Enabled Ena
KDC User YOUR KDC Graphic Menu Barcode Scrolling Brightness Keypad Language (FW Version 3.
KDC User YOUR KDC Top Menu KDC Mode Sub Menu Options KDC410/411 KDC415 KDC420/421 KDC425 KDC430 KDC450 KDC470C KDC500L KDC500C N/A Normal Default Default Default Default Default Default Default N/A Application N/A N/A N/A N/A N/A N/A N/A N/A N/A View Data View/Delete N/A N/A N/A N/A N/A N/A N/A Set Barcodes (410/411/415/4 70L/500L) EAN13 Enabled Enabled N/A N/A N/A N/A N/A View/Delete Data Enabled View/Delete Data N/A Enabled Enabled N/A N/A N/A N/A
KDC User YOUR KDC OCR Barcode Options (410/411/415/4 70L/500L) CodaBar_NoStar tStopChars UPCE_as_UPCA EAN8_as_EAN1 3 UPCE_as_EAN13 ReturnCheckDigi t VerifyCheckDigit Barcode Options (KDC420/425/4 50/470C/500C) UPCA_as_EAN1 3 I2of5_VerifyChe ckDigit Code39_VerifyC heckDigit I2of5_ReturnCh eckDigit Code39_Return CheckDigit UPCE_ReturnCh eckDigit UPCA_ReturnCh eckDigit EAN8_ReturnCh eckDigit EAN13_ReturnC heckDigit Codabar Code39 I2of5 Code11 Code128 Telepen UPCA UPCE Mayada Post N/A N/A Enabled
KDC User YOUR KDC EAN-13 EAN-8 MSI PosiCode GS1 PostNet PlanetCode Scan Options Power Scan Angle Filter Time Out Min. Barcode Length Min. Barcode Length Security Level Image Capture Auto Trigger Reread Delay Finger Trigger Partial Display Data Process Wedge / Store Sep.
KDC User YOUR KDC Data Editor/AIM ID Data Editor/Partial Data None/In Prefix/In Suffix Start Position None None None None N/A None None None 1 1 1 1 N/A 1 1 1 1 No.
KDC User YOUR KDC USB Config-USB Disk Mode (M model) USB Mode Disk Format Data Format USB Config-USB HID Mode (M model) NFC Config (N model) USB Mode NFC Power N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A Enabled Enabled Enabled N/A N/A N/A Disabled Disabled Packet Data Packet Data N/A N/A N/A N/A N/A N/A N/A N/A Disabled N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A
KDC User YOUR KDC Null Check Track1 Null Check Track2 Null Check Track3 Beep on error reading Encrypt MSR Data AES Key Length Card Type Track Separator ICCR Config Key Mgmt Sensitive/ Set Date/Time Sensitive/ Set Self-Test Sensitive/ Set Passwords Sensitive/ Key Mgmt Attach Start/End Sentinel Partial Data Start Position Partial Data Length Partial Data Action Power Erase/ Select Enabled/ Disabled / N/A N/A N/A N/A N/A N/A N/A Disabled N/A N/A N/A N/A N/A N/A N/A Enabled Disabled Enable
KDC User YOUR KDC KDC Mode Menu The KDC Mode Menu has two options – Normal Mode and Application Mode. Normal This is the default mode that provides basic barcode scanning. In normal mode, barcode data may be manipulated directly through the KDC or through KTSync during the synchronization process. Application This mode enables the user to run the user application created by the Application Generation Tool, as described in Chapter 6 Application Generation.
KDC User YOUR KDC Filter (Opticon laser model only) This menu enables the user to change the Filter mode from Normal to High for poor quality barcodes. The default is Normal. Timeout In this menu, you may set the scan timeout. The timeout options are from 500ms up to 10 seconds. The default is 2 seconds.
KDC User YOUR KDC AztecCode 1(1) 3750(3750) CodablockF 1(1) 2048(2048) Code16K 0(1) 160(160) Code49 1(1) 81(81) DataMatrix 1(1) 1500(1500) MaxiCode 1(1) 150(150) MicroPDF 1(1) 366(366) PDF417 1(1) 2750(2750) QRCode 1(1) 3500(3500) HanXin Code - - Postnet - - PlanetCode - - UK Post - - Mayada Post - - Kix Post - - Australia Post - - Japan Post - - China Post 2(4) 80(80) Korea Post 2(4) 80(48) OCR Off - - OCR A - - OCR B - - OCR Passport - -
KDC User YOUR KDC option.(1D Model only) x USB cable insertion requirement is removed from FW2.85/86.O and FW 3.02. x You may exit the auto trigger mode by pressing the scan button for 3 seconds. 0QVG Reread Delay You may adjust the reread delay from continuous to extra-long. Partial Display This option enables the user to display partial data. You may define the start position and number of characters to be displayed.
KDC User YOUR KDC - 4 bytes index would be added before “@” when responding to “p” command. 4 bytes index plus “@” character would be added after checksum byte if the user scans a barcode and wedges to the host. Data Editor The KDC provides various data editing options. z Prefix - Enables user to add a prefix to scanned data that may then be wedged to the host. The Prefix must be defined in the KTSync. The maximum length for a Prefix is 11 characters.
KDC User YOUR KDC 0QVG Users may also delete or display current prefixes by scanning the following special barcodes.
KDC User YOUR KDC z Suffix - Enables the user to add a suffix to scanned data, which may then be wedged to the host. The suffix must be defined in the KTSync. The maximum length for a suffix is 11 characters. 0QVG x This Suffix option is different from the Suffix option in KTSync, which appends the suffix to data during synchronization. 0QVG x The user may also define the suffix by scanning characters defined in Appendix C&D(E&F for KDC500). as shown below in the special barcodes.
KDC User YOUR KDC Prefix/Suffix Enter Finish 0QVG The user may also delete or display a current suffix by scanning the following special barcodes. KDC20/100/200/250/300/270L/350L/410/411/415/470L/500L Delete Suffix Display Suffix KDC30/270C/350C/420/421/425/450/470C/500C Delete Suffix Display Suffix z AIM ID - Enables the user to add AIM ID to scanned data, which may then be wedged to the host. AIM ID can be added to the end of a Prefix or Suffix.
KDC User YOUR KDC start position and number of characters to be stored and/or transferred. The user also can select if taking or erasing the characters selected with Start position and No of char(s). ¾ Start position This option specifies the start position of data. ¾ No of char(s) This option specifies the length of data. The ‘0’ means all data. ¾ Action This option selects if erasing or taking the specified data.
KDC User YOUR KDC BT Config Menu – KDC20/30/200/250/300/270/350/400/500 The KDC supports Bluetooth Ver2.1+EDR. Before utilizing the advantages of Bluetooth functionality with the KDC, the user should become familiar with Bluetooth connectivity and its impact on the host environment. To configure your KDC for Bluetooth functionality, you may use the KDC Menus. Below is a listing of the Bluetooth options and their settings.
KDC User YOUR KDC Beep Warning Enabled or Disabled(KDC500 doesn’t support) PWR Off Time 1 to 30 Minutes(KDC500 doesn’t support) PowerOff Msg Enabled or Disabled(KDC500 doesn’t support) MAC Address When users select this option, KDC displays 12 characters Bluetooth MAC Address. FW Version This option displays Bluetooth Firmware Version Wakeup Nulls Enabled or Disabled(KDC500 doesn’t support) BT Toggle Enable or Disable iOS device soft keyboard or Connect/Disconnect Bluetooth.
KDC User YOUR KDC BT Service Menu – KDC20/30/200/250/300/270/350/400/500 Power Users may choose to turn Bluetooth Power on or off. Select between Enable and Disable. Pairing Mode This option Enables user to enter pairing mode by simply selecting this menu. z The KDC enters into pairing mode so that the host Bluetooth device may search for it. z The KDC may exit pairing mode if the user presses the SCAN button or if it fails to pair with the Bluetooth host device within 90 seconds.
KDC User YOUR KDC a period of time. z z Power Mode: The user may choose the type power consumption for the GPS function. ¾ Users may extend the battery life of the GPS enabled model in Power Save mode. ¾ Users should use normal mode if accurate GPS data is required. ¾ The KDC350G will last about 15 hours in normal non-bypass data mode and 18 hours in power save non-bypass data mode. ¾ The KDC350G will last about 7 hours in normal bypass data mode and 8 hours in power save bypass data mode.
KDC User YOUR KDC This option enables the user to change to USB Disk mode and barcode data that KDC scanned is stored into a file in flash disk when this option is selected. KDC100M/200M/250M/300M/350 may be used as USB Disk with 4MB or 8MB space and KDC270 may be used as USB Disk with 8MB space. USB HID When this option is enabled, KDC enters into USB HID mode. Disk Format This option is available in USB Disk mode and Enables users to format KDC USB Disk.
KDC User YOUR KDC NFC Config Menu – KDC350N/411N/415N/421N/425N/500 NFC Power z Turning NFC Power on or off z Options: Enable/Disable Data Format z Options: Data only/Packet data.(KDC500 doesn’t support) UID Only z z z Enable or Disable UID Only menu The KDC only sends UID data to the host device when the KDC is in UID Only mode.
KDC User YOUR KDC Smart Hopping It enables KDC450U to find an optimized UHF channel and can be initiated by reading a special barcode. WIFI Config Menu (KDC350F) KDC350F WiFi model can send and receive data to/from host by using the following protocols. z UDP z TCP z HTTP_GET z HTTP_POST In UDP/TCP mode, KDC350F will support full duplex mode, meaning is the KDC350F will be ready to get data from host all the time. Power z Turns the Wi-Fi Module Power ON and OFF. z z Set AP SSID. Set AP Passcode.
KDC User YOUR KDC Send Stored z Enable/Disable KDC to send stored data when sending a new read data. CDMA Config Menu (KDC350WA CDMA) KDC350WA CDMA model can send and receive data to/from host by using the following protocols if and only if the device is activated and the Verizon network is available. z UDP z TCP z HTTP_GET z HTTP_POST In UDP/TCP mode, KDC350WA will support full duplex mode, meaning is the KDC350WA will be ready to get data from host all the time.
KDC User YOUR KDC z Enable/Disable KDC to reconnect to Server when it detects disconnection from Server. Send Stored z Enable/Disable KDC to send stored data when sending a new read data. Information z Displays CDMA module firmware version, the CDMA number, MEID, and IP address.
KDC User YOUR KDC AES Key length(KDC415/425/430 only) z Specify the AES key length. z Options: 128bits/192bits/256bits Card Type The user may select which type of MS card to read.
KDC User YOUR KDC ICCR Config Menu – KDC500 Power z Turning ICCR(IC Card Reader) on or off z Options: Enable/Disable IFD Number This option shows the EMV IFD(Interface Device) number. Config Number The option shows the stored EMV Contact Configuration number.
KDC User YOUR KDC SystemConfig Menu Memory Size (3.0+ version only, KDC500 doesn’t support) The user may select how much memory to divide between normal data memory and application database memory. z z The KDC will erase all stored data upon changing the partition size. The user should enter the following key sequence to change the partition. UP button + UP button + DOWN button + DOWN button + SCAN button Memory Status In this option, users may checks the number of stored barcodes and memory usage.
KDC User YOUR KDC z Power On Beep: Enables or disables beep sound when KDC power is on. z Beep On Connect: Enables or disables beep sound when KDC is connected to the host. z Beep On Scan: Enables or disables beep sound when KDC is scanning. z Beep On MS Card (KDC500 only) : Enables or disables beep sound when KDC reads a MS Card. z Beep On IC Card (KDC500 only) : Enables or disables beep sound when KDC reads an EMV Contact Card.
KDC User YOUR KDC Keypad(KDC350/500) This option enables users to enter data by using keypad. Language(Version 3.0+, KDC500) This option enables users to select KDC display languages. The supported languages are as following. z None – Languages is not supported. Default is an English. z US(English) z French z Italian z Spanish z Korean z Japanese KDC500 only supports US(English), Korean and Japanese.
KDC User YOUR KDC Key Mgmt Menu– KDC500 z Stored Keys : Displays all the encryption keys stored in the KDC500. z Inject Keys : In this menu, the user can inject the necessary encryption keys via Key Loader device.
KDC User YOUR KDC Sensitive Menu – KDC500 KDC500 Sensitive menu has sub menus which can impact on the KDC500 security services. KDC500 requires two passwords for the Sensitive menu group access in order to ensure only authorized people can utilize the sensitive services. The default passwords are 0000000 and 11111111. x For PCI PTS compliance, the default passwords should be changed prior to use.
KDC User YOUR KDC 3.4 LED Status Status LED Color z Green z z z Orange z z Red z z Successful Reading USB is connected and battery is fully charged. MFi mode in pairing mode. Low battery USB is connected and battery is charging HID mode is in pairing mode. (except KDC500) No reading SPP mode is in pairing mode. Table 5 - Explanation of LEDs 3.5 Empty Battery KDC100/200/250/300/270/350 The KDC will display the message Empty Battery Connect USB when the battery is empty.
KDC User YOUR KDC 3.6 Buffer Full The KDC will display the message Buffer Full when there is no more space in the flash memory or the number of collected barcodes reaches the maximum number of stored barcode. To prevent the loss of data, you should synchronize the data then reset the memory when this message is displayed. The 4MB/8MB version KDC reaches the Buffer Full condition in the following situations: x x x x x x x x x 0.5MB Partition - Collected data size reaches 0.
KDC User YOUR KDC 3.7 Reset Feature (100/200/250/300) or Power-on/off (KDC20/30/270/350/400/500) The Reset feature enables the user to restart the KDC100/200/250/300 if necessary, without losing any stored barcode data or option settings. To reset the KDC, follow the below steps. 1. 2. 3. Press the DOWN and SCAN buttons simultaneously for 5 seconds. When the LEDs illuminate orange, release the buttons. The KDC initial screen, KoamTac Data Collector KDC, displays when reset is complete.
KDC User YOUR KDC 3.8 Replace Battery Each KDC comes with a rechargeable, Lithium-polymer (KDC20/100/200) or Lithium-ion (KDC30/250/300/270/350/400/500) battery. The battery may be recharged from any USB port or KDC charging cradle, and may be recharged about 300 times before it needs to be replaced. KOAMTAC recommends replacing the battery annually, as a declining battery will cause noticeable performance degradation in the KDC. Replacement batteries may be purchased from a KDC reseller.
KDC User Manual BLUETOOTH 4. Bluetooth KDC20/30/200/250/300/270/350/400/500 The KDC20/30/200/250/300/270/350/400 supports HID (Human Interface Device) normal, HID iOS, SPP (Serial Port Profile) and SPP2.0 profiles. The KDC500 supports SPP only. The KDC20i/30i/200i/250i/300i/270i/350i/400i/500i supports MFi (Made for iPhone/iPad/iPod touch) profiles too.
KDC User Manual 0QVG BLUETOOTH The user should first un-pair the KDC from the Bluetooth host to change the Connect Device setting on the scanner to a different Bluetooth profile. Auto Connect This feature enables the KDC to automatically connect to the host device when the KDC is powered on. KDC500 doesn’t support Auto Connect.
KDC User Manual BLUETOOTH The default for this option is disabled. It is strongly recommended to keep it enabled to maximize the operation time of the KDC. If Auto Power Off is Enabled, Bluetooth may be manually powered off before the specified time in the PWR off time option. It is recommended to enable ‘Auto Power On’ option if this option is enabled. User doesn’t need to turn on the Bluetooth power manually with this configuration.
KDC User Manual BLUETOOTH If the Autolock time is set to more than one minute and the barcode scan interval is larger than the auto-lock time, there will be a one second delay of barcode transmission. The auto-lock time would be set as 0, 1, 2, 3, 4, 5, 10, 15 minutes. 0 means the iPhone/iPad/iPod touch never enters sleep mode. This option may not need from iOS 5.x. HID Keyboard The user may select an international keyboard – English, German, French, Spanish, or Italian.
KDC User Manual BLUETOOTH Function Key Transmission in HID mode The user may send F1 to F12 function keys by scanning special barcodes in HID mode. KDC500 doesn’t support this option. Disconnect/Reconnect/BT(HID) Toggle The user may disconnect or reconnect the Bluetooth connection, and toggle the soft keyboard using side buttons. KDC500 doesn’t support this option.
KDC User Manual BLUETOOTH 4.2 Bluetooth Service Power The POWER option enables the user to Enable or Disable the Bluetooth functionality of the KDC. To use Bluetooth, this option must be set to enable. However, like all devices enabled for Bluetooth, the KDC will constantly search to connect with a Bluetooth host when set to enable. Constant searching for Bluetooth devices increases power consumption. Unless you are using Bluetooth with your KDC, this option should be set to disable.
KDC User Manual BLUETOOTH Discovering KDC200/250/300/270/350 starts to search for neighboring Bluetooth devices if the Discovering menu is executed. It will take about 30 seconds to finish searching and to list available neighboring Bluetooth devices. Another option is to enter the corresponding Bluetooth MAC address in the KTSync Bluetooth menu, instead of waiting for the KDC to search for neighborhood Bluetooth devices. KDC20/30/400 only supports via KTSync configuration.
KDC User Manual BLUETOOTH 6. The iPhone/iPad/iPod touch will find a new device as Keyboard 7. Click Keyboard device iOS Soft Keyboard Toggling using BT Toggle Option. Users need to select the option to use this feature in BT Config>BT Toggle. Press the DOWN button to toggle a soft keyboard. Auto Pairing For SPP and MFi mode, user used to select host profile before pairing. However, user doesn’t need to select host device profile if this option is enabled.
KDC User Manual SYNCHRONIZATION 5. Synchronization When barcode data is collected, it must be uploaded to your application. KTSync, which is bundled with the KDC, is a software that Enables barcode data to be uploaded to any PC, PDA, or smartphone running Android 2.1+, Apple iOS3.1.3+, Blackberry,Mac and Windows XP/Vista/7/8/10/Mobile 5.0+. It has three major functions. (Windows XP/Vista/7/8/10 version supports all of the following features.
KDC User Manual SYNCHRONIZATION 5.1 KTSync Menu KTSync was installed on your PC during the initial installation process. Before data may be uploaded to any host device, KTSync must be launched on the host and configured to recognize the KDC. The following screen displays when KTSync is launched: Figure 16 - KTSync® Synchronizer Initial Screen File Menu z Connect: This option displays the Serial port (COM#) assigned to KDC. You may also use this option to manually assign the Serial port.
KDC User Manual SYNCHRONIZATION Settings Menu z z z Synchronization: Select Synchronize options. Barcode & KDC: Select Barcode and KDC options. Others: Select Auto Connection and/or Synchronization Confirmation options. Figure 18 – Setting Menu Application Menu(KDC500 doesn’t support Application) z z z z z Generation: Create user application or download predefined application. DB Lookup: Enables users to download DB into KDC and display barcode description field.
KDC User Manual SYNCHRONIZATION 5.2 File Menu Connect to KDC The KDC automatically connects to a COM port when connected to the PC’s USB port. If needed, the user may manually assign the KDC COM port by using the KTSync Connection submenu under the File menu. Figure 21 - COM Port Selection for KDC z The COM port assignment is found in the Windows Device Manager. z KTSync will not connect to the KDC if it is in the KDC Menus. You must EXIT from the KDC Menus.
KDC User Manual SYNCHRONIZATION Bluetooth This menu option enables the user to register up to ten Bluetooth devices, including their MAC address, PIN #, and optional prefixes or suffixes. This option enables direct Bluetooth connection between KDC and other Bluetooth devices, such as a Bluetooth printer. The user should choose a Bluetooth device to be connected in “Connect to” menu in KDC Bluetooth Service menu.
KDC User Manual SYNCHRONIZATION Configuration This menu is useful for the users who need to configure different KDCs with same settings. In this menu, you may export settings from a KDC to your computer and import it to other KDCs. When you select Configuration in File menu, you will need to choose either Export or Import. First, select Export. You name the settings file, press Open, and it is exported to your computer.
KDC User Manual SYNCHRONIZATION Synchronization Settings KTSync provides several synchronization options for synchronizing data from your KDC to host devices. Figure 24 - KTSync Synchronization Settings Destination of Data When barcode data is uploaded to the host device, you must assign a destination for the data. Destination of Data options include:(This option is applied to only Windows XP/Vista/7/8/10) z z z File - This option means data will be saved in the assigned filename.
KDC User Manual z SYNCHRONIZATION Select from Current Running Application – This option enables the user to select a currently running application for data synchronization. 0QVG • Data synchronization begins immediately if “Automatically Synchronize after Connection” is selected. If not selected, data synchronization is started manually by the user. • Users SHOULD NOT operate the PC during the synchronization process. It may interrupt the process causing unreliable results.
KDC User Manual SYNCHRONIZATION This option lets the user automatically synchronize collected data immediately to the computer when the KDC is connected to the host. z IMPORTANT: Before selecting this option, remember to configure all options properly. z Data synchronization may be done manually by clicking the synchronize icon if this option is not selected. Beep while Synchronization The user may enable or disable the beep tone during the synchronization process.
KDC User Manual SYNCHRONIZATION Synchronization Options Synchronize KDC Time with PC Time when Connected This option enables the user to synchronize the KDC date and time with the host date and time. Synchronization of date and time occurs after the data is uploaded to the host device. Delays The user may set transmission delays between barcodes and characters during the synchronization process. It is important to set proper delays to prevent errors during the transmission of collected barcodes.
KDC User Manual SYNCHRONIZATION 5.3 Barcode & KDC Settings KTSync enables the user to configure the KDC Scan Options and Barcode Settings. The configuration options for the KDC using KTSync are similar to the Set Barcodes, Code Options, Data Editing and Scan Options on the KDC Menu. Please refer to 11. Appendix A – Barcode & Scan Options for proper barcode settings for the application. 0QVG The user must configure barcode and scan options properly for optimal KDC performance.
KDC User Manual SYNCHRONIZATION Select Symbologies and Symbology Options The process for scanning and reading barcodes is delicate and complicated. Although your KDC is equipped with a high performance scan engine, if configured incorrectly it may not perform at its peak performance level. To ensure its high performance, the KDC comes configured to optimize its scan engine technology.
KDC User Manual SYNCHRONIZATION 5.4 Other Settings Other options under the Settings menu allow the user to select four additional settings: z Ask Confirmation before Trying Auto Connection prevents unintentional launch of KTSync. z Ask Confirmation before Starting Auto Synchronization prevents unintentional synchronization of data. z Minimize KTSync on Start will minimize KTSync and send it to the tray upon execution.
KDC User Manual SYNCHRONIZATION KDC Menu in KTSync After connecting KDC to PC with a USB cable, run KTSync on your PC and you will see KDC Menu on the right side of KTSync window. Click KDC Menu, and you may configure your KDC in KDC Menu window, as shown below. Figure 27 - KDC Menu in KTSync 5.5 Mobile pKTSync pKTSync provides limited functionality for Pocket PC 2003 and Mobile 5.0+ users. 1.Synchronization - Provides data upload functionality to your applications. 2.
KDC User Manual SYNCHRONIZATION For detailed explanations of these functions, please refer to earlier sections of this chapter. WARNING: The user must assign the correct COM port to KDC before using pKTSync. Please refer to the mobile device manual for details on Bluetooth pairing and COM port assignment methods.
KDC User Manual SYNCHRONIZATION 5.6 Android aKTSync The KTSync provides limited functionality of PC aKTSync to Android users. x aKTSync only supports Android devices with 2.1+ OS version and that are compatible with BluetoothChat application. x KDC with Bluetooth Spec2.1+EDR doesn’t prompt Pin code entry menu. 0QVG KDC and Android Pairing 1.Pairing z Select SPP Bluetooth profile from the KDC ConnectDevice submenu in BT Config menu. z Search KDCxxx from Android and pair the two devices. z If SPP2.
KDC User Manual SYNCHRONIZATION B. From the list of paired devices, choose the KDC to use. C. On the top menu bar of aKTSync, you will see a message “connecting”, and then “connected”. D. On the KDC display, you will see “Pairing Succeeded!!!” and then “Bluetooth Connected”. E. Select Settings option on the bottom left to change KTSync setting.
KDC User Manual SYNCHRONIZATION Keyboard Wedge 1. Launch Settings on the Android device. 2. Select Language and Keyboard (or Input method). 3. Select KTSync Keyboard. 4. Launch the application and touch the input box to focus. 5. The barcode will be wedged to the input box upon scanning a barcode.
KDC User Manual SYNCHRONIZATION 5.7 iPad/iPhone/iPod Touch KTSync The KTSync for iPad/iPhone/iPod touch provides limited functionality of PC KTSync for iPad, iPhone and iPod touch users. 1. 2. 3. 4. The KDC supports SPP and MFi Bluetooth profiles. The iPhone/iPad/iPod touch should use MFi Bluetooth profiles. MFi is the default profile of KDCi models. Download the KTSync program from the App Store. Enable the iPhone/iPad/iPod touch Bluetooth power from the Setting > General > Bluetooth menu.
KDC User Manual x x SYNCHRONIZATION Synchronization - The user may configure Synchronization options, such as destination of data, data formation and delimiters. Other settings - Users may configure KDC350 GPS module, disconnection options and soft trigger button. x Figure 30 - iPad/iPhone/iPod touch KTSync How to Connect and Reconnect MFi Mode using UP Keys 1. The user needs to select the option to use this feature in the BT Config > BT Toggle. 2.
KDC User Manual SYNCHRONIZATION How to use Keyboard Wedge with iKTSync 1. Navigate to the iPhone/iPad/iPod Settings > General > Keyboard > Keyboards > Add New Keyboard... > Select the KTSync keyboard to be added. 2. Select the KTSync Keyboard > Allow Full Access.
KDC User Manual SYNCHRONIZATION 3. Open up the application you want to scan into, and tap on the screen so the on-screen keyboard appears. Tap and hold on the globe icon located to the left of the spacebar. Select the KTSync Keyboard & begin scanning! Note: The KDC must be connected to KTSync & the KTSync keyboard must be selected in order for this to work.
KDC User Manual SYNCHRONIZATION 5.8 Blackberry bKTSync The bKTSync provides limited functionality of PC KTSync for Blackberry users. KDC with Bluetooth Spec2.1+EDR does not prompt Pin code entry menu. 0QVG 1. Download and install bKTSync from the Blackberry App World. http://appworld.blackberry.com/webstore/search/ktsync?lang=en 2. Go to Blackberry Options > Applications menu and enable Input Simulation option. 3. Change KDC Bluetooth profile in ConnectDevice option to SPP. 4.
KDC User Manual SYNCHRONIZATION Figure 31 - Blackberry bKTSync
KDC User Manual SYNCHRONIZATION 5.9 KTSync for Mac OS X The KTSync Mac OS X version provides limited functionality of PC Windows KTSync for Mac OS X users. 0QVG x KTSync for Mac OS X version supports both Bluetooth SPP profile and USB connection. The user should pair KDC with Mac before using the KTSync program via Bluetooth connection. x Mac OS X version KTSync is built as a X86 binary application and works with the Intelbased Mac. It is verified on Mac PC running Mac OS X 10.6.5 and later versions.
KDC User Manual SYNCHRONIZATION Synchronize Button The user may start the synchronization process by pressing the Synchronize button. The user may select the destination of barcode data in the settings menu. There are 4 selectable destinations: File, Internal viewer, Active window, and User application. Clear Button The user may press this button to clear the KTSync internal viewer. Settings Button The user may configure synchronization options on the following screen by pressing the Settings button.
KDC User Manual z z z z SYNCHRONIZATION File: The KTSync makes a file name based on 3.11 if file name is specified as an “sn_timestamp.txt”. The default directory is /Users/Shared/KTSyncData directory. The user may define another directory or another filename by clicking the “New” button. The maximum file path length is 128 characters. Internal Viewer: The KTSync displays barcode data in KTSync internal text viewer.
KDC User Manual SYNCHRONIZATION z Serial Number When Attach serial number is enabled, this option determines when to attach serial number. “Start of record” means to attach at the front of record and “End of record” means to attach to the end of record. z Data Order This option specifies the order of data (Barcode Type, Barcode Data and Timestamp) in the record.
6. Application Generation 0QVG KDC FW2.85 does not support the Application Generation feature. Users should upgrade FW2.85 to FW2.86 or FW3.0+ to use Application Generation feature. When you select the Application menu from the KTSync, the user may choose from the following five Applications: Generation, DB Lookup, Master/Slave, Pick/BIN, and Inventory. Users may also download saved programs using the Import & Download option.
Figure 34 - Application Generation Menu Generate Application Generate step 1 - To generate a custom application, click on the Generate Step 1 box. This enables the user to define the user prompts and data collection settings for Step 1 of the custom application. Below is a description of each field. These prompts are the same when selecting Generate step 2 and Generate step 3. 0QVG The custom application may include only Step 1.
quantity field may not be adjusted. This field may be defined from “-1” to “30” seconds. “-1” second enables infinite waiting of user quantity input. z Enable data filter Check this box to enable the data filtering option. Data filtering enables the user to predefine different aspects of the barcode data the user are collecting. Data Filter Settings When the user select Enable data filtering, the user must click on the Settings button to select the Data filter setting.
0QVG z The default KDC minimum barcode length defined in scan option is 4. Therefore, users should change KDC minimum barcode length to 2 or 3 to define minimum data length to 2 or 3. Maximum Data Length This field enables the user to define the maximum length of a scanned barcode. The defined length may be between 2 and 256 characters. If the user scans a barcode that has a length is greater than the defined length, the barcode data is not collected.
z Do not Save Non-Compliant Data This field tells the KDC how to manage non-compliant data based on the defined data filtering fields. If this field is enabled, non-compliant data is NOT stored in the KDC. If this option is not enabled, non-compliant data is stored. Generate step 2 To include another step in the data collection process, click the box, Generate step 2. This step has the same options as Step 1. In this step, the user have the option of repeating step 2 by clicking the box, Repeat Step.
6.2 Predefined Applications KTSync provides four Predefined Applications: Master/Slave, Pick/Bin, DB Lookup and Inventory. Master/Slave Master/Slave predefined application enables you to define a master barcode for comparison with one or more slave barcodes. The predefined application may be run once or continuously. Within either setting, you may define a substring for comparison of master and slave barcodes. Master/Slave Onetime Define one master barcode and compare it with one slave barcode.
z Number of ID and Symbology Define Pick ID characters from 1 to 32 and the barcode symbology. .'& 0RGH %QNNCVKQP 'HILQH VXEVWULQJ WR HILQ QH VXEVWULQJ LQJ EH FRPSDUHG H FRPSDUH HG G 'HIDXOW LV HQWLUH DXOW LV HQ DXOW LV HQ EDUFRGH 2QHWLPH 5GNGEV /5 /QFG GEEV /5 /Q Q 2QHWLPH H H &RQWLQXRXV &RQWLQXRXV 6FDQ 0DVWHU FDQ 0DVW %DUFRGH 6FDQ 0DVWHU FDQ 0DVW %DUFRGH 8S .H\ 8S .H\
Select the number of characters to be compared from 0 to 255. 0 means all characters.
Exit to KDC Menu User ID Defined No + Scan User ID Valid User ID No Yes Up Side Key Please scan Pick data No Store User ID Yes User Input Scan button Valid Barcode Yes Please scan Bin data Ignore Scanned Pick Label Timeout User Input Up Side Key Scan button Ignore Scanned Pick Label No Store User ID, KDC Serial Number, Timestamp, Pick Barcode Yes Barcode Match? Figure 39 - Pick/BIN Application Flow Chart
DB Lookup Application The DB Lookup application enables the user to download a database to the KDC that may then be utilized for advanced AUTO-ID applications, such as displaying additional data after scanning a barcode. For example, using our DB Lookup application, you may download a product database including information such as description, price, and stock quantity.
z Comparing Barcode Length - Number of characters to be compared from 0 to 255 where 0 is all characters. z Display on KDC - Define database fields to be displayed on KDC. KDC may display one to three fields. KDC will display one field in two or three lines, if same field is specified in line entering option. Figure 40 - DB Lookup Application Menu Inventory Application The Inventory application enables the user to count inventories by scanning inventory barcodes.
z Collect Partial Data Start Position is between 1 to 256. z Collect Partial Data Length is between 1 to 256. z Users may create an inventory database using Microsoft Excel. ¾ Excel file must be saved as .txt. ¾ Click User Inventory DB option to display inventory description. ¾ Click Do not add non-existing item into DB if one do not wish to add new items into inventory DB. ¾ The number of Barcode Data Field is between 1 to 4. ¾ The position of Display Filed is between 1 to 4.
ISSUE CAUSE SOLUTION KDC not working Dead battery z z KDC not charging Hardware failure Bad battery Poor USB port z Damaged barcode Out of scan range z Incorrect angle z Symbology not supported Scan options z z Move the scanner closer to barcode Move scanner farther from the barcode Change the angle of scanner to barcode Contact KOAMTAC www.KOAMTAC.
charge KDC Abnormal KTSync Operation on DELL PC Quickset Utility z z WSED Utility z z z Touch Keypad not working (KDC500) Compromise Message displayed (KDC500) Foreign Object detected z Hardware failure Security Attack detected z z Disable Quickset Utility before using KTSync. Dell Quickset utility interrupts normal KTSync operation Disable WSED Wireless enable/disable utility delete the folder C:\Program Files\WSED, which contains a file WSED.
8. Warranty LIMITED WARRANTY AND DISCLAIMERS BY OPENING THE PACKAGE OF THIS PRODUCT YOU AGREE TO BECOME BOUND BY THE LIABILITY AND WARRANTY CONDITIONS AS DESCRIBED BELOW. UNDER ALL CIRCUMSTANCES, THIS MANUAL SHOULD BE READ ATTENTIVELY, BEFORE INSTALLING AND OR USING THE PRODUCT. Serial Number A serial number appears on the KDC label. This official registration number is strictly related to the device purchased. Make sure that the serial number appearing on your KDC is not removed.
9. Contact Information CORPORATE HEADQUARTERS 116 Village Blvd., Suite 305 Princeton, NJ 08540, USA Phone: 609-256-4700, FAX: 609-228-4373 Email: support@koamtac.com For more information, visit our website - www.koamtac.
BARCODE & SCAN OPTIONS 10. Appendix A – Barcode & Scan Options The process for scanning and reading barcodes is delicate and complicated. Although the KDC is equipped with a high performance scan engine, if configured incorrectly, it may not perform at its peak performance level. To ensure its high performance, the KDC comes configured to optimize its scan engine technology. Unless you clearly understand the impact of your changes to the KDC settings, please do not change factory default settings. 10.
BARCODE & SCAN OPTIONS EAN does not have any options. The Bookland EAN barcode does not contain any groupings – that is, there are no hyphens or separators. Thus, the ISBN 957-630-239-0 is transmitted as 9576302390. Add-on Symbologies By default, the 2 or 5 digit add-on symbols with a UPCE, UPCA, EAN-8, and EAN-13 barcode are neither decoded nor transmitted. Transmission for these specific symbologies is enabled by setting the appropriate withAddon options.
BARCODE & SCAN OPTIONS 000001234567012 True Table 9 - Add-on for EAN-8 Symbology The add-on symbol contains neither a check digit nor a terminating guard band. Every effort has been made to reduce the decoding error; however, it is likely to decode a partial scan of a 5-digit add-on symbol as a 2-digit add-on symbol. It is strongly recommended that the minimum security level be set at 2 while decoding add-on symbols.
BARCODE & SCAN OPTIONS EAN8_as_EAN13 Converted to EAN-13 No effect No effect No effect UPCA_as_EAN13 No effect Converted to EAN-13 No effect UPCE_as_EAN13 No effect No effect Converted to EAN-13 UPCE_as_UPCA No effect No effect Converted to UPC-A Table 10 - Symbology Conversion Verification of Optional “Check Digit” Code39 and Interleave 2 of 5 have an optional check digit, which, by default, is not verified.
BARCODE & SCAN OPTIONS EAN13_ReturnCheckDigit Yes No effect No effect No effect No effect No effect EAN8_ReturnCheckDigit No effect Yes No effect No effect No effect No effect UPCA_ReturnCheckDigit No effect No effect Yes No effect No effect No effect UPCE_ReturnCheckDigit No effect No effect No effect Yes No effect No effect Code39_ReturnCheckDigit No effect No effect No effect No effect Yes No effect I2of5_ReturnCheckDigit No effect No effect No effect No effect No
BARCODE & SCAN OPTIONS 10.3 Miscellaneous Barcode Information Height of a Linear Barcode Industry standards suggest a height of either 6.5mm or 15% of the symbol length, whichever is greater. Symbols of less than recommended heights may cause recognition problems. Check Characters Yes, we recommend the use of check-characters in barcodes. Operating without check-characters is not safe and will lead to errors that are costly to correct.
BARCODE & SCAN OPTIONS Data Buffer Full When the data buffer is full, the KDC displays a message, Buffer Full, ignoring any command to scan barcodes. The user must reset the data buffer to continue data collection.
KDC User Manual FAQ 11. Appendix B –FAQ 11.1 Symbology Q: What barcode symbologies are supported by the KDC? A: The KDC20/100/200/250/270L/350L/410/411/415/470L/500L support 1D barcode only. KDC30/300/270C/350C/420/421/425/450/470C/500C support most major 1D, 2D barcode symbologies and OCR. -&% % % -&% . . % % . . & $CTEQFGU & $CTEQFGU $]WHF&RGH $]WHF5XQHV &RGDEORFN) &RGH .
KDC User Manual FAQ 11.2 Host Interface Q: What interface ports are supported by the KDC? A: The KDC100 has two USB ports: Swing-out Type A and Ultra-mini USB ports that support USB to Serial protocol. KDC200/250/300/350/400(except KDC470) have one Ultra-mini USB port that supports USB to Serial protocol and Bluetooth that supports HID/SPP/MFi Bluetooth profiles. KDC270 and KDC470 have one Micro USB port.
KDC User Manual FAQ 11.4 Memory Q: How many barcodes may be stored in the KDC? A: 4MB version of KDC100M/200M/250M/300M350 may storemaximum of 204,800 barcodes and 8MB version and KDC270/470 may store maximum of 409,600 barcodes . KDC20/30 have 150KB data memory which may store maximum 7,680 barcodes. KDC41x/42x has 80KB data memory and may store maximum 4,096 barcodes. KDC500 has 3MB data memory which may store maximum 153,600 barcodes.
KDC User Manual FAQ on KOAMTAC support page. Android®, iPhone/iPad/iPod touch, Blackberry®, and Mac® SDK are available through KOAMTAC authorized distributors.
KDC User Manual APPLICATION GENERATION 12. Appendix C – 1D Special Barcodes (KDC20/20D/100/200/250/350L/350D/410/415) 12.
KDC User Manual APPLICATION GENERATION Enable Code128 Disable Code128 Enable I2 of 5 Disable I2 of 5 Enable Codabar Disable Codabar Enable GS1-128 Disable GS1-128 Enable Code93 Disable Code93 Enable Code35 Disable Code35 Enable Bookland EAN Disable Bookland EAN Enable EAN13 with Addon Disable EAN13 with Addon
KDC User Manual APPLICATION GENERATION Enable EAN8 with Addon Disable EAN8 with Addon Enable UPCA with Addon Disable UPCA with Addon Enable UPCE with Addon Disable UPCE with Addon Enable GS1 Omni Disable GS1 Omni Enable GS1 Limited Disable GS1 Limited Enable GS1 Expanded Disable GS1 Expanded 12.
KDC User Manual APPLICATION GENERATION Convert UPCE to UPCA Do NOT convert UPCE to UPCA Convert EAN8 to EAN13 Do NOT convert EAN8 to EAN13 Convert UPCE to EAN13 Do NOT convert UPCE to EAN13 Return Check Digit Do NOT Return Check Digit Verify Check Digit Do NOT Verify Check Digit Convert UPCA to EAN13 Do NOT Convert UPCA to EAN13 Verify check digit for I2of5 Do NOT verify check digit for I2of5 Verify check digit for Code39 Do NOT verify check digit for Code39
KDC User Manual APPLICATION GENERATION Return check digit for I2of5 Do NOT return check digit for I2of5 Return check digit for Code39 Do NOT return check digit for Code39 Return check digit for UPCE Do NOT return check digit for UPCE Return check digit for UPCA Do NOT return check digit for UPCA Return check digit for EAN8 Do NOT return check digit for EAN8 Return check digit for EAN13 Do NOT return check digit for EAN13 12.
KDC User Manual APPLICATION GENERATION
KDC User Manual APPLICATION GENERATION 12.4 Scan Options Wide Scan Angle* Narrow Scan Angle* Normal Filter Mode* High Filter Mode* Enable Auto Trigger Disable Auto Trigger Reread Delay = Continuous Reread Delay = Short Reread Delay = Medium Reread Delay = Long Reread Delay = Extra Long *Opticon laser only 12.
KDC User Manual APPLICATION GENERATION Scan Timeout = 2sec Scan Timeout = 3sec Scan Timeout = 4sec Scan Timeout = 5sec Scan Timeout = 6sec Scan Timeout = 7sec Scan Timeout = 8sec Scan Timeout = 9sec Scan Timeout = 10sec 12.
KDC User Manual APPLICATION GENERATION Minimum Length = 6 Minimum Length = 7 Minimum Length = 8 Minimum Length = 9 Minimum Length = 10 Minimum Length = 11 Minimum Length = 12 Minimum Length = 13 Minimum Length = 14 Minimum Length = 15 Minimum Length = 16 Minimum Length = 17 Minimum Length = 18 Minimum Length = 19 Minimum Length = 20 Minimum Length = 21
KDC User Manual APPLICATION GENERATION Minimum Length = 22 Minimum Length = 23 Minimum Length = 24 Minimum Length = 25 Minimum Length = 26 Minimum Length = 27 Minimum Length = 28 Minimum Length = 29 Minimum Length = 30 Minimum Length = 31 Minimum Length = 32 Minimum Length = 33 Minimum Length = 34 Minimum Length = 35 Minimum Length = 36
KDC User Manual APPLICATION GENERATION 12.
KDC User Manual APPLICATION GENERATION 12.
KDC User Manual APPLICATION GENERATION 12.
KDC User Manual 12.
KDC User Manual 1D SPECIAL BARCODES 12.
KDC User Manual 1D SPECIAL BARCODES 12.
KDC User Manual 12.
KDC User Manual 1D SPECIAL BARCODES Bluetooth Profile = MFi Bluetooth Profile = SPP2.
KDC User Manual 1D SPECIAL BARCODES Display BT MAC Address Display BT FW Version Enable Wakeup Nulls Disable Wakeup Nulls Enable BT Toggle Disable BT Toggle Enable BT Disconnect Button Disable BT Disconnect Button Enable Auto Pairing Disable Auto Pairing
KDC User Manual 12.
KDC User Manual 12.
KDC User Manual 1D SPECIAL BARCODES BT Power Off Time = 15min BT Power Off Time = 16min BT Power Off Time = 17min BT Power Off Time = 18min BT Power Off Time = 19min BT Power Off Time = 20min BT Power Off Time = 21min BT Power Off Time = 22min BT Power Off Time = 23min BT Power Off Time = 24min BT Power Off Time = 25min BT Power Off Time = 26min BT Power Off Time = 27min BT Power Off Time = 28min BT Power Off Time = 29min BT Power Off Time = 30min
KDC User Manual 12.
KDC User Manual 12.
KDC User Manual 12.
KDC User Manual 12.
KDC User Manual 12.
KDC User Manual 12.19 1D SPECIAL BARCODES System Memory Size = 0.5M / 3.5M Note1,2 Memory Size = 1M / 3M Note1,2 Memory Size = 2M / 2M Note1,2 Memory Size = 3M / 1M Note1,2 Memory Size = 4M / 0M Note1,2 Confirm Memory Size Change Note1,2 Memory Size = 5M / 3M Note2 Memory Size = 6M / 2M Note2 Memory Size = 7M / 1M Note2 Memory Size = 8M / 0M Note2 Memory Status Reset Memory Erase Memory Reset App data ଖ Note 1. 4M Model Only ଖG Note 2.
KDC User Manual 1D SPECIAL BARCODES Reset BT Registry Enable Auto Erase Disable Auto Erase Date/Time Battery Display Version Lock Button Unlock Button Enable Beep Sound Disable Beep Sound High Beep Volume Low Beep Volume Enable Auto Menu Exit Disable Auto Menu Exit
KDC User Manual 1D SPECIAL BARCODES Enable MFi Mode Disable MFi Mode Enable Vibrator Disable Vibrator Scan Success = No vibration Scan Success = 1 vibration Scan Success = 2 vibrations Scan Success = 3 vibrations Scan Success = 4 vibrations Scan Success = 5 vibrations Scan Failure = No vibration Scan Failure = 1 vibration Scan Failure = 2 vibrations Scan Failure = 3 vibrations Scan Failure = 4 vibrations Scan Failure = 5 vibrations
KDC User Manual 1D SPECIAL BARCODES Enable Port Status Disable Port Status Display Format = Time & Battery Display Format = Type & Time Display Format = Type & Battery Display Format = Memory Status Display Format = GPS Data (GPS Model) Display Format = Barcode Only Display Format = Graphic Enable Scrolling Disable Scrolling Factory Default KDC Reset Enable Backup Battery (KDC20/20D Only) Disable Backup Battery (KDC20/20D Only)
KDC User Manual 12.
KDC User Manual 12.
KDC User Manual 12.22 12.
KDC User Manual 1D SPECIAL BARCODES 2 3 4 5 6 7 8 9
KDC User Manual 12.
KDC User Manual 1D SPECIAL BARCODES o p q r s t u v w x y z
KDC User Manual 12.
KDC User Manual 1D SPECIAL BARCODES O P Q R S T U V W X Y Z
KDC User Manual 12.
KDC User Manual 12.27 1D SPECIAL BARCODES Symbol Character ! “ # $ % & ‘ ( ) * + , - .
KDC User Manual 1D SPECIAL BARCODES / : ; < = > ? @ [ \ ] ^ _ ` { |
KDC User Manual x x x 1D SPECIAL BARCODES } ~ Start String Stop String The user may compose a string up to 16 characters. A string would be composed by scanning the “Start-String”, number/alphabet/special characters, and “Stop-String” special barcodes. The KDC will abort string composition if the user do not scan “Stop-String” in one minute after scanning “Start-String” and number/alphabet/special characters.
KDC User Manual 12.
KDC User Manual 12.
KDC User Manual 12.
KDC User Manual 12.31 12.
KDC User Manual 12.
KDC User Manual 12.
KDC User Manual 2D SPECIAL BARCODES 13. Appendix D – 2D Special Barcodes (KDC30/300/350C/350WA/420/425/450) 13.1 Set Symbologies For KDC300/350C/420/425/450, please refer to Honeywell Adaptus® Technology enabled scanner user manual, such as 4600 or 4820. 13.2 Barcode Options For KDC300/350C/420/425/450, please refer to Honeywell Adaptus® Technology enabled scanner user manual, such as 4600 or 4820. 13.
KDC User Manual 2D SPECIAL BARCODES 13.
KDC User Manual 2D SPECIAL BARCODES 13.
KDC User Manual 2D SPECIAL BARCODES 13.
KDC User Manual 2D SPECIAL BARCODES Minimum Length = 16 Minimum Length = 17 Minimum Length = 18 Minimum Length = 19 Minimum Length = 20 Minimum Length = 21 Minimum Length = 22 Minimum Length = 23 Minimum Length = 24 Minimum Length = 25 Minimum Length = 26 Minimum Length = 27 Minimum Length = 28 Minimum Length = 29 Minimum Length = 30 Minimum Length = 31
KDC User Manual 2D SPECIAL BARCODES Minimum Length = 32 Minimum Length = 33 Minimum Length = 34 Minimum Length = 35 Minimum Length = 36
KDC User Manual 2D SPECIAL BARCODES 13.7 Image Capture (except KDC30) Capture Now Enable Image Capture Image Format = JPEG Image Format = BMP Pixel Depth = 1 bit per pixel Pixel Depth = 8 bit per pixel 13.
KDC User Manual 2D SPECIAL BARCODES 13.
KDC User Manual 13.
KDC User Manual 13.
KDC User Manual 2D SPECIAL BARCODES 13.
KDC User Manual 13.
KDC User Manual 2D SPECIAL BARCODES Bluetooth Profile = MFi Bluetooth Profile = SPP2.
KDC User Manual 2D SPECIAL BARCODES Display BT Mac Address Display BT FW Version Enable Wakeup Nulls Disable Wakeup Nulls Enable BT Toggle Disable BT Toggle Enable BT Disconnect Button Disable BT Disconnect Button Enable Auto Pairing Disable Auto Pairing
KDC User Manual 13.
KDC User Manual 13.
KDC User Manual 2D SPECIAL BARCODES BT Power Off Time = 15min BT Power Off Time = 16min BT Power Off Time = 17min BT Power Off Time = 18min BT Power Off Time = 19min BT Power Off Time = 20min BT Power Off Time = 21min BT Power Off Time = 22min BT Power Off Time = 23min BT Power Off Time = 24min BT Power Off Time = 25min BT Power Off Time = 26min BT Power Off Time = 27min BT Power Off Time = 28min BT Power Off Time = 29min BT Power Off Time = 30min
KDC User Manual 13.
KDC User Manual 13.
KDC User Manual 13.
KDC User Manual 13.
KDC User Manual 13.
KDC User Manual 13.21 2D SPECIAL BARCODES System Memory Size = 0.5M / 3.5M Note1,2 Memory Size = 1M / 3M Note1,2 Memory Size = 2M / 2M Note1,2 Memory Size = 3M / 1M Note1,2 Memory Size = 4M / 0M Note1,2 Confirm memory size Note1,2 Memory Size = 5M / 3M Note2 Memory Size = 6M / 2M Note2 Memory Size = 7M / 1M Note2 Memory Size = 8M / 0M Note2 Memory Status Reset Memory Erase Memory Reset App data ଖ Note 1. 4M Model Only ଖG Note 2.
KDC User Manual 2D SPECIAL BARCODES Reset BT Registry Enable Auto Erase Disable Auto Erase Date/Time Battery Display Version Lock Button Unlock Button Enable Beep Sound Disable Beep Sound High Beep Volume Low Beep Volume Enable MFi Mode Disable MFi Mode
KDC User Manual 2D SPECIAL BARCODES Enable Vibrator Disable Vibrator Scan Success = No vibration Scan Success = 1 vibration Scan Success = 2 vibrations Scan Success = 3 vibrations Scan Success = 4 vibrations Scan Success = 5 vibrations Scan Failure = No vibration Scan Failure = 1 vibration Scan Failure = 2 vibrations Scan Failure = 3 vibrations Scan Failure = 4 vibrations Scan Failure = 5 vibrations Enable Auto Menu Exit Disable Auto Menu Exit
KDC User Manual 2D SPECIAL BARCODES Enable Port Status Disable Port Status Display Format = Time & Battery Display Format = Type & Time Display Format = Type & Battery Display Format = Memory Status Display Format = GPS Data(GPS Model) Display Format = Barcode Only Display Format = Graphic Enable Menu Barcode Disable Menu Barcode Enable Scrolling Disable Scrolling Factory Default KDC Reset
KDC User Manual 13.
KDC User Manual 13.
KDC User Manual 13.
KDC User Manual 13.
KDC User Manual 2D SPECIAL BARCODES o p q r s t u v w x y z
KDC User Manual 13.
KDC User Manual 2D SPECIAL BARCODES O P Q R S T U V W X Y Z
KDC User Manual 13.
KDC User Manual 13.28 2D SPECIAL BARCODES Symbol Character ! “ # $ % & ‘ ( ) * + , - .
KDC User Manual 2D SPECIAL BARCODES / : ; < = > ? @ [ \ ] ^ _ ` { |
KDC User Manual 0QVG x x x 2D SPECIAL BARCODES } ~ Start String Stop String The user may compose a string up to 16 characters. A string would be composed by scanning the “Start-String”, number/alphabet/special characters, and “Stop-String” special barcodes. The KDC will abort string composition if the user do not scan “Stop-String” in one minute after scanning “Start-String” and number/alphabet/special characters.
KDC User Manual 13.
KDC User Manual 13.
KDC User Manual 13.31 13.
KDC User Manual 2D SPECIAL BARCODES Power On Time = 1.5 sec Power On Time = 2 sec Power On Time = 2.5 sec Power On Time = 3 sec Power On Time = 3.5 sec Power On Time = 4 sec Power On Time = 4.5 sec Power On Time = 5 sec Power Off Time = 500ms Power Off Time = 1 sec Power Off Time = 1.5 sec Power Off Time = 2 sec Power Off Time = 2.5 sec Power Off Time = 3 sec Power Off Time = 3.
KDC User Manual 2D SPECIAL BARCODES Power Off Time = 4.
KDC User Manual 13.33 13.
KDC User Manual 13.
KDC User Manual 2D SPECIAL BARCODES AP SSID AP Passcode Connect Server IP Enable Send Stored Disable Send Stored
KDC User Manual 13.
KDC User Manual 13.
KDC User Manual MULTIPLE SPECIAL BARCODES 14. APPENDIX E - MSR Special Barcodes (KDC415/425MSR) 14.
KDC User Manual MULTIPLE SPECIAL BARCODES Disable Track Disable Track1 Disable Track2 Disable Track3 Track Separator Track Separator = None Track Separator = Space Track Separator = Comma Track Separator = Semi Colon Track Separator = CR Track Separator = LF Track Separator = CR+LF Track Separator = Tab AES Key Length AES Key Length = 128 bits AES Key Length = 192 bits
KDC User Manual MULTIPLE SPECIAL BARCODES AES Key Length = 256 bits MSR Card Type MSR Card Type = ISO MSR Card Type = Other 1 MSR Card Type = AAMVA
KDC User Manual MULTIPLE SPECIAL BARCODES 14.
KDC User Manual MULTIPLE SPECIAL BARCODES Disable Track1 Disable Track2 Disable Track3 Track Separator Track Separator = None Track Separator = Space Track Separator = Comma Track Separator = Semi Colon Track Separator = CR Track Separator = LF Track Separator = CR+LF Track Separator = Tab AES Key Length
KDC User Manual MULTIPLE SPECIAL BARCODES AES Key Length = 128 bits AES Key Length = 192 bits AES Key Length = 256 bits MSR Card Type MSR Card Type = ISO MSR Card Type = Other 1 MSR Card Type = AAMVA
KDC User Manual MULTIPLE SPECIAL BARCODES 15. Appendix F – 1D Special Barcodes (500D) 15.
KDC User Manual MULTIPLE SPECIAL BARCODES Enable Code128 Disable Code128 Enable I2 of 5 Disable I2 of 5 Enable Codabar Disable Codabar Enable GS1-128 Disable GS1-128 Enable Code93 Disable Code93 Enable Code35 Disable Code35 Enable Bookland EAN Disable Bookland EAN Enable EAN13 with Addon Disable EAN13 with Addon
KDC User Manual MULTIPLE SPECIAL BARCODES Enable EAN8 with Addon Disable EAN8 with Addon Enable UPCA with Addon Disable UPCA with Addon Enable UPCE with Addon Disable UPCE with Addon Enable GS1 Omni Disable GS1 Omni Enable GS1 Limited Disable GS1 Limited Enable GS1 Expanded Disable GS1 Expanded
KDC User Manual MULTIPLE SPECIAL BARCODES 15.
KDC User Manual MULTIPLE SPECIAL BARCODES Verify check digit for I2of5 Do NOT verify check digit for I2of5 Verify check digit for Code39 Do NOT verify check digit for Code39 Return check digit for I2of5 Do NOT return check digit for I2of5 Return check digit for Code39 Do NOT return check digit for Code39 Return check digit for UPCE Do NOT return check digit for UPCE Return check digit for UPCA Do NOT return check digit for UPCA Return check digit for EAN8 Do NOT return check digit for EAN8 R
KDC User Manual MULTIPLE SPECIAL BARCODES 15.
KDC User Manual MULTIPLE SPECIAL BARCODES 15.4 Scan Options Enable Auto Trigger Disable Auto Trigger Reread Delay = Continuous Reread Delay = Short Reread Delay = Medium Reread Delay = Long Reread Delay = Extra Long 15.
KDC User Manual MULTIPLE SPECIAL BARCODES Scan Timeout = 4sec Scan Timeout = 5sec Scan Timeout = 6sec Scan Timeout = 7sec Scan Timeout = 8sec Scan Timeout = 9sec Scan Timeout = 10sec 15.
KDC User Manual MULTIPLE SPECIAL BARCODES Minimum Length = 8 Minimum Length = 9 Minimum Length = 10 Minimum Length = 11 Minimum Length = 12 Minimum Length = 13 Minimum Length = 14 Minimum Length = 15 Minimum Length = 16 Minimum Length = 17 Minimum Length = 18 Minimum Length = 19 Minimum Length = 20 Minimum Length = 21 Minimum Length = 22 Minimum Length = 23
KDC User Manual MULTIPLE SPECIAL BARCODES Minimum Length = 24 Minimum Length = 25 Minimum Length = 26 Minimum Length = 27 Minimum Length = 28 Minimum Length = 29 Minimum Length = 30 Minimum Length = 31 Minimum Length = 32 Minimum Length = 33 Minimum Length = 34 Minimum Length = 35 Minimum Length = 36
KDC User Manual MULTIPLE SPECIAL BARCODES 15.
KDC User Manual MULTIPLE SPECIAL BARCODES 15.8 Data Process - Wedge/Store, Enter Key & Extend Key Wedge Only Wedge & Store Always Store Only Save if Sent Save if Not Sent Enable Enter Key Disable Enter Key Enable Extend Key Disable Extend Key 15.
KDC User Manual MULTIPLE SPECIAL BARCODES Finish Prefix/Suffix Enter Cancel Prefix/Suffix Enter Delete Prefix Delete Suffix Display Prefix Display Suffix AIM ID None AIM ID In Prefix AIM ID In Suffix 15.
KDC User Manual MULTIPLE SPECIAL BARCODES 15.
KDC User Manual 15.
KDC User Manual 15.
KDC User Manual MULTIPLE SPECIAL BARCODES Enable Beep On Scan Disable Beep On Scan Enable BeepOnMSCard Disable BeepOnMSCard Enable BeepOnICCard Disable BeepOnICCard Enable BeepOnNFCCard Disable BeepOnNFCCard High Beep Volume Low Beep Volume Enable Auto Menu Exit Disable Auto Menu Exit Enable Port Status Disable Port Status Display Format = Time & Battery Display Format = Type & Time
KDC User Manual MULTIPLE SPECIAL BARCODES Display Format = Type & Battery Display Format = Memory Status Display Format = Barcode Only Factory Default KDC Reset
KDC User Manual 15.
KDC User Manual 15.15 MULTIPLE SPECIAL BARCODES NFC Enable NFC Power 15.
KDC User Manual MULTIPLE SPECIAL BARCODES Enable Null Check Track1 Disable Null Check Track1 Enable Null Check Track2 Disable Null Check Track2 Enable Null Check Track3 Disable Null Check Track3 Enable Attach SS/ES Disable Attach SS/ES MSR Card Type = ISO MSR Card Type = Other 1 MSR Card Type = AAMVA MSR Card Type = JIS 2
KDC User Manual 15.17 15.18 MULTIPLE SPECIAL BARCODES ICCR(IC CARD READER) Enable ICCR Power Disable ICCR Power IFD Number Config Number Key Management Stored Keys 15.
KDC User Manual MULTIPLE SPECIAL BARCODES
KDC User Manual MULTIPLE SPECIAL BARCODES 16. Appendix G – 2D Special Barcodes (KDC500C) 16.1 Set Symbologies For KDC500C, please refer to Honeywell Adaptus® Technology enabled scanner user manual, such as 5600. 16.2 Barcode Options For KDC500C, please refer to Honeywell Adaptus® Technology enabled scanner user manual, such as 5600. 16.
KDC User Manual MULTIPLE SPECIAL BARCODES 16.
KDC User Manual MULTIPLE SPECIAL BARCODES 16.
KDC User Manual MULTIPLE SPECIAL BARCODES 16.
KDC User Manual MULTIPLE SPECIAL BARCODES Minimum Length = 16 Minimum Length = 17 Minimum Length = 18 Minimum Length = 19 Minimum Length = 20 Minimum Length = 21 Minimum Length = 22 Minimum Length = 23 Minimum Length = 24 Minimum Length = 25 Minimum Length = 26 Minimum Length = 27 Minimum Length = 28 Minimum Length = 29 Minimum Length = 30 Minimum Length = 31
KDC User Manual MULTIPLE SPECIAL BARCODES Minimum Length = 32 Minimum Length = 33 Minimum Length = 34 Minimum Length = 35 Minimum Length = 36
KDC User Manual MULTIPLE SPECIAL BARCODES 16.7 ScanIfConnect ScanIfConnect = Enable ScanIfConnect = Disable 16.
KDC User Manual MULTIPLE SPECIAL BARCODES 16.
KDC User Manual 16.10 MULTIPLE SPECIAL BARCODES Data Process – Data Format Data format = Barcode only Data format = Packet data 16.
KDC User Manual 16.
KDC User Manual 16.
KDC User Manual MULTIPLE SPECIAL BARCODES Enable Beep On Scan Disable Beep On Scan Enable BeepOnMSCard Disable BeepOnMSCard Enable BeepOnICCard Disable BeepOnICCard Enable BeepOnNFCCard Disable BeepOnNFCCard High Beep Volume Low Beep Volume Enable Auto Menu Exit Disable Auto Menu Exit Enable Port Status Disable Port Status Display Format = Time & Battery Display Format = Type & Time
KDC User Manual MULTIPLE SPECIAL BARCODES Display Format = Type & Battery Display Format = Memory Status Display Format = Barcode Only Enable Menu Barcode Disable Menu Barcode Factory Default KDC Reset
KDC User Manual 16.
KDC User Manual 16.15 MULTIPLE SPECIAL BARCODES NFC Enable NFC Power 16.
KDC User Manual MULTIPLE SPECIAL BARCODES Enable Null Check Track1 Disable Null Check Track1 Enable Null Check Track2 Disable Null Check Track2 Enable Null Check Track3 Disable Null Check Track3 Enable Attach SS/ES Disable Attach SS/ES MSR Card Type = ISO MSR Card Type = Other 1 MSR Card Type = AAMVA MSR Card Type = JIS 2
KDC User Manual 16.17 16.
KDC User Manual 16.
KDC User Manual MULTIPLE SPECIAL BARCODES 17. Appendix G – Multiple Special Barcodes This chapter explains how to make a multiple configuration barcode for the KDC to configure multiple KDC settings by scanning one barcode. The KDC provides special barcodes that enable changes to the KDC configuration; but, this current barcode changes only one configuration. New KDC firmware VersionR_305 introduces a feature to enable the user to make one special barcode to change multiple KDC configurations. 17.
KDC User Manual MULTIPLE SPECIAL BARCODES z z z z z z is a control character 0x16 in hex format. M is an ASCII character 0x4D in hex format. is a control character 0x0d in hex format. KDC is an ASCII string 0x4B 0x44 0x43 in hex format. is an ASCII string for each configuration . is an ASCII string 0x2E in hex format that indicates the end of barcode.
KDC User Manual MULTIPLE SPECIAL BARCODES 18. Appendix H – Product Specification 18.