User's Manual

K
KDC User Manual SYNCHRONIZATION


Select Symbologies and Symbology Options
The process for scanning and reading barcodes is delicate and complicated. Although your KDC is
equipped with a high performance scan engine, if configured incorrectly it may not perform at its
peak performance level. To ensure its high performance, the KDC comes configured to optimize its
scan engine technology. Unless you clearly understand the impact of your changes to the KDC
settings, please do not change factory default settings. Please refer to Appendix A for details.
Pressing the Default icon will reset all symbology related options to factory default settings.
Data Editing Option
Prefix - Enables the user to add a prefix to scanned data that may then be stored in KDC or wedged
to the host. The Prefix format must be defined in the data format menu of KTSync. The maximum
length for a Prefix is 11 characters.
This Prefix option is different from the Prefix option in KTSync that appends the prefix
to data during synchronization.
Suffix - Enables the user to add a suffix to scanned data, which may then be stored in KDC or wedged
to the host. The Suffix must be defined in the data format menu of KTSync. The maximum length for
a Suffix is 11 characters.
This Suffix option is different from the Suffix option in KTSync that appends the suffix to
data during synchronization.
AIM ID - Enables the user to add AIM ID to scanned data, which may then be stored in KDC or
wedged to the host. AIM ID must be defined in data format menu of KTSync. AIM ID is either added
to the end of Prefix or Suffix.
Partial Data: Enables the user to display and store partial data. The user defines the start position
and number of characters to be displayed and stored.
z Select the x characters from y position
¾ Set Partial Data Start Position to y, Partial Data Length to x, Partial Data Action to
Select.
¾ Partial Data Length 0 selects all characters from y position.
z Erase the x characters from y position
¾ Set Partial Data Start Position to y, Partial Data Length to x, Partial Data Action to
Erase.
¾ Partial Data Length 0 erases all characters from y position.
0QVG
0QVG