User's Manual



quantity field may not be adjusted. This field may be defined from “-1” to “30” seconds.
“-1” second enables infinite waiting of user quantity input.
z Enable data filter
Check this box to enable the data filtering option. Data filtering enables the user to
predefine different aspects of the barcode data the user are collecting.
Data Filter Settings
When the user select Enable data filtering, the user must click on the Settings button to select the
Data filter setting. The options for the Data filter settings are the same for Step1, Step 2, and Step 3.
z
Barcode Type
This field enables the user to select the type of barcodes the KDC will collect. When the user
clicks on the box, Select Symbols is enabled. A listing of the symbologies supported by the
KDC will display. To select a barcode symbology, click on the box associated with the
symbology.
z Minimum Data Length
This field enables the user to define the minimum length of the scanned barcode. The length
may be between 2 and 36 (1D models), 2 and 48 (2D models) characters. If the user scans a
barcode that has a length of less than the defined length, the barcode data is not collected.
Figure 35 - Data Filter Settings