User's Manual

KDC User YOUR KDC









Unscrew the screw indicated by

the arrow.





Remove the battery cover by

pulling it down.





Remove the battery.

Pull out the 2 pin connecter

gently.



3.8

Replace Battery

Each KDC comes with a rechargeable, Lithium-polymer (KDC20/100/200) or Lithium-ion

(KDC30/250/300/270/350/400/500) battery. The battery may be recharged from any USB port or

KDC charging cradle, and may be recharged about 300 times before it needs to be

replaced. KOAMTAC recommends replacing the battery annually, as a declining battery will cause

noticeable performance degradation in the KDC. Replacement batteries may be purchased from a

KDC reseller. Batteries should be disposed of properly as according to the WEEE regulation. The

steps for replacing a battery are as follows.

1. Disassemble the KDC back cover by unscrewing the middle screw.

2. Remove the old battery and replace with a new battery.

3. Reassemble the back cover.

Figure 15 - Replacing a Battery