Specifications

PC to HDMI
1080p Scaler Box
Operation Manual
1.Introduction
This Scaler Box is designed to upscale analog video signal from PC input source
to digital HDMI output of wide-range HDTV and PC resolutions, up to
1080p/WUXGA. Besides video upscaling, the scaler box also converts input
audio signal from TOSLink or L/R to both digital and analog formats, then output
to HDMI combining with the video, TOSLink (optical fiber), and phone jack (L/R
audio) simultaneously. This unit has a comprehensive OSD menu that allows
user to select a variety of output resolutions and adjust for best picture quality.
2. Main Features

HDMI 1.2, HDCP 1.1 and DVI 1.0 compliant.

Scales any PC resolutions to PC (VGA ~ WUXGA)/ HD (480i ~ 1080p)
resolutions.

Automatically detect the factory setting of the connected display and
output the corresponding resolution and refresh rate, when the NATIVE
output is selected.

Provides output picture adjustment on contrast, brightness, hue, saturation,
sharpness, RGB (color tone) level and aspect ratio size.

Supports high resolution output (See section “6.2. Support Resolution” for
reference.):
PC: VGA, SVGA, XGA, SXGA, UXGA, WXGA, WSXGA, WUXGA.
SD/HD: 480i, 576i, 480p, 576p, 720p, 1080i and 1080p

Supports stereo LPCM analog/digital audio input and stereo LPCM
analog/digital output. Simply select among the audio input sources in the
OSD menu, then output the audio to HDMI, TOSLINK(optical fiber) and
phone jack simultaneously.
HDMI AUDIO
MENU +
-
OPTICAL
OUTPUT
4. Operation Controls and Functions
4.1 Front Panel
1 PC Input: Connect the PC input D-Sub (15-pin) port to the D-Sub output
port of your source equipment such like PC.
2 Audio Input: Connect the PC 3.5mm phone jack input port to the analog
audio output port of your source equipment.
3 TOSLink (optical fiber) Input: Connect the optical input port to the digital
audio output port of your source equipment.
4 Power: Plug the 5VDC power supply into the unit and connect the
adaptor to AC wall outlet.
1 HDMI Output: Connect the HDMI output port to the HDMI input port of
your display such like HDTV.
2 TOSLink (optical fiber) Output: Connect the optical output port to the
digital audio input port of your amplifier.
3 Audio Output: Connect the PC 3.5mm phone jack output port to the
analog audio input port of your equipment.
4 Menu Button: Press the MENU button to bring up OSD operation menu.
(See section “4. OSD Operation” for reference.)
5 +/- Button:
a. On the first tier of OSD menu, use + and – buttons to move up/down
the highlight item for selection.
b. Once the desired option is selected, use + and – buttons to toggle
between setting values.
4.2 Rear Panel
PC AUDIO OPTICAL
DC 5V
INPUT
1
2
3
4
1
2
3
4
5
3. Package Contents
 PC to HDMI 1080p Scaler Box
 5VDC Power Supply Adaptor
 Operation Manual