Datasheet

Seite 1
DATENBLATT
Art.-Nr.: 56C002 ISO Gehäuse für Lautsprecher KFZ
Product description
"WORLD GRADE"
Easy flow, general purpose injection moulding grade with high resistance to
impact and heat distortion; intended for a wide range of applications, particularly
in the housings sector.
Applications
Household : washing machine, vacuum cleaners; refrigerator parts;
Office equipment ; monitor, printer housings, computers, copier parts ; toys
Physical form and storage
Terluran is delivered in the form of cylindrical or spherical pellets. The bulk
density of the pellets is from 0.55 to 0.65 g/cm³. Values may differ for special
grades. Standard Packaging unit: 25 kg paper bag. In addition, delivery in larger
units of up to 1000 kg (IBC = Intermediate Bulk Container) or silo trucks can be
arranged.
In dry areas with normal temperature control, Terluran pellets can be stored for
relatively long periods of time without any change in mechanical properties.
With unstable colours, however, storage over a number of years can give rise to
some change in colour. Under poor storage conditions, Terluran absorbs
moisture, but this can be removed by drying.
Product safety
No adverse effects on the health of processing personnel have been observed
where the products are correctly processed and the production areas are
suitably ventilated. For styrene, alpha-methylstyrene, acrylonitrile, and 1,3-
butadiene the maximum allowable workplace concentrations must be observed
according to the pertaining national regulations. In Germany, the following limit
values are valid (Nov 1999): styrene, MAK-value: 20 ml/m³ = 85 mg/m³;
alpha-methylstyrene, MAK-value: 100 ml/m³ = 480 mg/m³; acrylonitrile, TRKvalue:
3 ml/m³ = 7 mg/m³ and 1,3-butadiene, TRK-value: 5 ml/m³ = 11
mg/m³. According to EU directive 67/548/EEC, Annex I (Nov 1999), acrylonitrile
and 1,3-butadiene are classified as carcinogenic, category 2 ( 'substances
which should be regarded as if they are carcinogenic to man'). Experience has
shown that when Terluran is processed correctly with appropriate ventilation,
the levels are far below the limits mentioned above. Inhalation of the vapours of
degradation products which can arise on severe overheating of the materials or
during purging out should be avoided. Our Terluran safety data sheets give
further information.
Note
The information submitted in this publication is based on our current knowledge and
experience. In view of the many factors that may affect processing and application, these
data do not relieve processors of the responsibility of carrying out their own tests and
experiments; neither do they imply any legally binding assurance of certain properties or
of suitability for a specific purpose. It is the responsibility of those to whom we supply our
products to ensure that any proprietary rights and existing laws and legislation are
observed.