Service manual

41
1
1
Fig.1
Fig.2
-
Removing the CD Mechanism Module (Fig.1)
- Removing the Tuner Amp Unit (Fig.2)
Remove the four screws.
Remove the screw.
1. Remove the Case.
-
Removing the Case (not shown)
Disconnect the connector and then remove the
CD Mechanism Module.
-
Removing the Grille Assy (Fig.1)
2
Remove the two screws and then remove
the Grille Assy.
1
1
2 2
CD Mechanism Module
Grille Assy
1
2
2
2
3
3
3
4
Tuner Amp Unit
2
Remove the three screws.
3
Straight the tabs at three locations
indicated.
4
Remove the screw and then remove
the Tuner Amp Unit.
1
1
5
6
7
8
F
E
D
C
B
A
5
6
7
8
DEH-P2550/XM/ES
7. GENERAL INFORMATION
7.1 DIAGNOSIS
7.1.1 DISASSEMBLY