OPERATING INSTRUCTIONS MANUAL DE INSTRUCCIONES MODE D’EMPLOI CDC-Z127 YU STEREO CAR CD RECEIVER RADIO-TOCADISCOS DE CD ESTEREOFONICO PARA AUTOMOVIL ENGLISH ESPAÑOL FRANÇAIS OWNER’S RECORD For your convenience, record the model number and serial number (you will find them on the bottom side of your set) in the space provided below. Please refer to them when you contact your AIWA dealer in case of difficulty. Model No. CDC-Z127 Serial No.
PRECAUTIONS TABLE OF CONTENTS • Use only in a 12-volt DC negative-ground electrical system. • Disconnect the vehicle’s negative battery terminal while mounting and connecting the unit. • When replacing the fuse, be sure to use one with an identical amperage rating. Using a fuse with a higher amperage rating may cause serious damage to the unit. • Do NOT attempt to disassemble the unit. Laser beams from the optical pickup are dangerous to the eyes.
BASIC OPERATION, AUDIO AND CLOCK ADJUSTMENT PWR/MUTE SEL AUDIO CONTROL 1 Press SEL repeatedly to select the mode to be adjusted. Pressing SEL cycles through the modes. The selected mode’s indicator flashes. 2 Turn AUDIO CONTROL to increase/decrease the level or to select on/off for the selected mode. Note Adjust the level or select on/off within 5 seconds, or the selected mode will return to previous state.
Setting the clock Monaural mode 1 Press and hold DISP until the clock indicator When signals become weak, or reception becomes poor, the unit automatically switches to Monaural mode to reduce noise. flashes in the display. 2 Press i (to set hour) or k (to set minute), and then turn AUDIO CONTROL. 3 Press DISP. Displaying the clock 1 Press DISP. To return to the former display, press DISP again. Local mode Local mode allows you to tune in only to strong stations during Seek Tuning.
Presetting stations manually Labeled-side up (Manual Memory) 1 Press BAND repeatedly to select the desired band (FM1, FM2, FM3, AM1, or AM2). 2 Press i or k to tune in to a desired station (see “Tuning in to a station” as well for another tuning method). 3 Press and hold the desired preset station button until the unit beeps. Track number Note A newly preset station replaces the station on the same band that was previously stored on that preset station button.
Random Play You can play all the tracks in random order. 1 Press RNDM during CD play. “RANDOM” appears in the display. To cancel Random Play, press RNDM again. Note During Random Play, pressing r allows you to skip only to the beginning of the current track, not to the previous track. TROUBLESHOOTING Error code In the following cases the corresponding error code indication appears. Follow the suggestions below to solve such problems.
SPECIFICATIONS RADIO SECTION (FM) Frequency Range: 87.5 MHz – 108 MHz Usable Sensitivity: 12.7 dBf 50 dB Quieting Sensitivity: 17.
Printed in Indonesia