Owner manual

SPECIFICATIONS
Tuner section
Frequency range
<U model> FM; 87.5-108.0 MHz
Antenna: FM antenna
AM: 530-1,710 kHz
Antenna: Ferrite bar antenna
<LHmodel> FM: 87.5-108.0 MHz
Antenna: FM/SW antenna
SW: 3.9-12.1 MHz
Antenna: FM/SW antenna
MW: 530-1,710 kHz
Antenna: Ferrite bar antenna
Deck section
Track format
4 tracks, 2 channels
Frequency range
Normal tape: 50-12,500 Hz (El AJ)
Recording system
AC bias
Erasing system
Magnet erase
Heads Recording/playback head (1)
Erasure head (1)
CD player section
Disc Compact disc
Scanning method
Non-contact optical scanner
(semiconductor laser)
Laser Semiconductor laser >,=780nm
Rotation speed
Approx. 500-200 rpm/CLV
Error correction
Cross interleave, Reed Solomon
code
No. of channels
2 channels
D/A conversion
16-bit linear
Common section
Speaker 77 mm cone type (2)
Output Headphones jack (stereo mini
jack)
Power output
2W -r 2W (EIAJ/8n DC)
Power requirements
DC 12 V using eight R14 (size C)
batteries
U model: AC 120V
LH model: AC 110-120V/220-
240V selectable
Power consumption
U model: 12W
LH model: 15W
Dimensions 286 (W) x 158 (H) x 237 (D) mm
Weight Approx. 2.7 kg (excluding batter
ies)
Accessories AC cord (1)
Specifications and external appearance are
subject to change without notice.
TROUBLESHOOTING GUIDE
1 Symptom Causes ' Solutions
(0
0)
c
o
(5
The power does not turn on.
• The AC cord is not connected properly.
• Correct the connection.
• The batteries are not inserted.
• The batteries are worn out.
• The batteries are not inserted properly.
• Insert new batteries with the + and - marks properly
aligned.
There is no sound.
• An incorrect function was selected.
• Set the FUNCTION switch to select the correct input.
<D
c
3
H
There is constant, wave-like static.
• The radio station is not correctly tuned.
• Correct the tuning.
There is noise.
• The unit is picking up outside noise.
• Change the location or direction of the antenna.
• Turn the unit to a different orientation.
• Move the unit away from other electrical appliances,
like a TV or fluorescent lights, or move the appliances.
o
0)
o
Tape does not run.
• The II PAUSE button was pressed.
• Press the ii PAUSE button again.
Recording is impossible.
• The erasure prevention tab of the cassette
has been broken off.
• Cover the erasure prevention tab hole with cellophane
tape.
• The recording head is dirty.
• Clean the head.
Erasure is not done completely.
• The erasure head is dirty.
• Clean the head.
• A metal or chrome tape is being used.
• Sound that has been already recorded on metal (type
IV) or chrome (type II) tapes may not be erased
completely by this unit.
Cl
o
CD does not play.
• The disc is incorrectly placed.
• Place the disc with the label facing up.
• The disc is dirty.
• Clean the disc.
• There is condensation on the lens.
• Wait about one or two hours and try again.
• The player is on pause.
• Press the Ml PLAY/PAUSE button to release pause.
26