Owner manual

STOP/EJECT

TAPE RADIO CD

(I—

FUNCTION

TRACK

PAUSE

psfT <K]

or:

RECORDING FROM A COMPACT

DISC

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Recording is done on the side facing the cassette hoider.

1 Insert a cassette.

(D The side to be recorded on

2 Set the FUNCTION switch to CD.

OPE/BATT indicator iights.

0 is displayed in the TRACK display.

3 Place a disc with the label facing up.

4 Press the ll PAUSE button.

5 Press the • REC button.

The ◄ PLAY button is pressed simultaneously.

6 Press the ^il PLAY/PAUSE button to start CD play.

7 Press the ll PAUSE button to release it.

Recording starts.

To stop recording

Press the m/A STOP/EJECT button.

After recording

Set the FUNCTION switch to POWER OFF/TAPE.

When the end of the tape is reached

The tape will stop. To record on the other side, turn the cassette over

and press the • REC button again.

Usable tapes

Use normal (type I) tapes for recording. If you use metal (type IV) or

chrome (type II) tapes, sound that has been already recorded may not

be erased completely.

' Do not set the FUNCTION switch to POWER OFF/TAPE or RADIO

during CD recording.

' You cannot listen to a cassette or the radio during CD recording.

' If the erasure prevention tab is broken off, the • REC button cannot

be depressed.

' The output volume and tone have no effect on recording even if they

are adjusted.