OPERATING INSTRUCTIONS INSTRUCCIONES DE MANEJO MODE D’EMPLOI CSD-FD92 CSD-FD82 COMPACT DISC STEREO RADIO CASSETTE RECORDER RADIOCASETE ESTÉREO CON REPRODUCTOR DE DISCOS COMPACTOS RADIO-CASSETTE LECTEUR DE CD STEREO English : See page 2. 8B-CHE-903-01 001225ACK-I-M En Español : Ver la página 12. E Français : Voir page 22.
WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN “CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Specifications the outlet. To avoid defeating the safety feature of the polarized plug, do not force it into a power outlet. 3 AC power cord - When disconnecting the AC power cord, pull it out by the AC power plug. Do not pull the cord itself. - Never handle the AC power plug with wet hands, as this could result in fire or shock. - Power cords should be firmly secured to avoid being bent, pinched, or walked upon. Pay particular attention to the cord from the unit to the power socket.
Power supply Using on batteries Open the lid of the battery compartment on the rear and insert eight R14 (size C) batteries, not supplied, as illustrated below. Then close the lid. To switch from AC power supply to battery supply, disconnect the AC cord from the AC inlet. OPE/BATT The OPE/BATT indicator lights up while the power is on. R14 (C) Using on AC house current Connect the AC cord as illustrated below.
Remote control Insert two R6 (size AA) batteries. R6 (AA) When the reach of the remote control signal is less than 5 meters (16 feet), replace the batteries. The remote control may not operate correctly when: - The unit is exposed to intense light, such as direct sunlight - Objects block the remote control signal to the unit To use the buttons on the remote control Buttons on the remote control and the main unit with identical indications have the same functions.
PHONES \ VOL s STOP / CLEAR POWER STANDBY/ ON 6 d PLAY / DIR / PRESET ( c PLAY / PRESET) QSOUND, T-BASS, 3-MODE EQ r, t (TUNING -, +) REPEAT / MODE / SLEEP 1 TUNER OPERATION Press * TUNER/BAND repeatedly to select the desired band. FM AM The power is turned on and the previously tuned station is received. * or BAND on the remote control (applicable when the AC cord is connected) 2 DOWN a PAUSE / SET TUNER / BAND A UP, Press r, t (TUNING -, +) to select a station.
0-9, +10 SOUND ADJUSTMENT MODE Volume or tone adjustment does not affect recording. EQ VOL i, k BAND c PLAY a PAUSE r, t s STOP VOL (volume) Press VOL UP or DOWN. The volume level is displayed as a number from 0 to 25. • The volume level is automatically set to 14 if the power is turned off when the volume level is set to 15 or more. * 3-MODE EQ (equalizer) PRESETTING STATIONS You can preset up to 15 stations in each band. 1 2 Select a station.
a PAUSE / SET CD s STOP / CLEAR d PLAY / DIR / PRESET ( c PLAY / PRESET) POWER STANDBY/ ON6 r, t REPEAT/ MODE/SLEEP B 1 CD OPERATION Press CD. The power is turned on. 2 Press PUSH OPEN to open the disc compartment. Place a disc with the printed side up and close the disc compartment. PUSH OPEN Total number of tracks and total playing time are displayed. It will take about 15 seconds when loading a CD-RW disc. 3 Press d PLAY/DIR/PRESET (c PLAY/ PRESET) to start play.
0-9, +10 REPEAT c PLAY MODE a PAUSE r, t s STOP REPEAT, RANDOM PLAY A single track or all tracks can be played repeatedly, and all the tracks randomly. Random play can be repeated as well. PROGRAMMED PLAY Up to 30 tracks can be programmed from the disc. 1 “RANDOM M” flashes in the display. * or MODE on the remote control Repeat play In playback mode, press * REPEAT/MODE/SLEEP repeatedly to select or . : Repeats all the tracks. : Repeats a single track. Select a track with r or t.
a PAUSE / SET TAPE s STOP / CLEAR d PLAY / DIR / PRESET ( c PLAY / PRESET) POWER STANDBY/ ON6 r, t REPEAT/ MODE/SLEEP C w REC / REC MUTE TAPE OPERATION • Use Type I (normal) tapes only. • CSD-FD92 plays (records on) both sides. • CSD-FD82 plays (records on) the side facing up. PLAYBACK 1 Press TAPE. The power is turned on. If the tape has been inserted, play begins.
SETTING THE SLEEP TIMER The unit can be turned off automatically at a specified time. c PLAY 1 Hold down * REPEAT/MODE/SLEEP until “SLEEP” flashes in the display. 2 Within 4 seconds, press r or t to specify the time until the power is turned off. a PAUSE r, t s STOP * or MODE on the remote control Each time it is pressed, the time changes between 10 and 180 minutes in 10-minute steps. To stop recording, press s. To stop CD play, press it again.
NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.