Operating instructions
tousi-E-19
ENGLISH
18
Remote control button
1 VOLUME 6 button
To increase the volume.
2 VOLUME 7 button
To decrease the volume.
3 FUNCTION button
To select Radio, Tape Play, CD Changer
Play or AUX IN mode.
4 DISC/PRESET
M
/REW button
CD changer:
Press and release to skip back to the
beginning of the current track or the
previous track.
Press and hold to switch to the
previous CD.
Radio:
Each press of the button tunes in the
next preset station, in descending
order.
Tape:
Press to rewind the tape.
To resume playback, press the same
button again.
5 DISC/PRESET
N
/FF button
CD changer:
Press and release to skip to the next
track.
Press and hold to switch to the next
CD.
Radio:
Each press of the button tunes in the
next preset station, in ascending order.
Tape:
Press to fast forward the tape.
To resume playback, press the same
button again.
TROUBLESHOOTING
Error codes (when using the optional AIWA CD
changer)
In the following cases the corresponding error
code indication appears. Follow the suggestions
below to solve the problem. If the error code
indication does not disappear, consult an AIWA
service center.
ERROR01 The disc magazine is not properly
inserted in the CD changer. Reinsert
the magazine. Refer to the
instruction manual for the CD
changer.
ERROR02 No CDs are loaded in the disc
magazine. Insert CDs properly.
Refer to the instruction manual for
the CD changer.
ERROR03 Focus error. Check that the discs
are loaded properly in the disc
magazine (right side up, etc.).
ERROR04 Problem with the CD changer. Reset
the unit by pressing the Reset button.
If this does not solve the problem,
consult an AIWA service center.
ERROR05 The CD changer is overheated.
Allow the changer to cool off by
moving the vehicle out of direct
sunlight.
Reset button
The Reset button is visible when you detach the
front panel. Try pressing this button if a connected
CD changer does not operate properly. When
you press this button, use the tip of a pointed
object such as a pencil or toothpick.
Note that all your settings stored in memory,
however, will be erased if you press this button.
Reset button