Operation Manual

——-— ————- -— .-. -——- ---
—.-—. . . .
■
IICH
■
lICH
IH23M45S
(3)
+
1.
llCH
L
5
1H23M45s
(4)
“r
ON SCREEN FUNCTION DISPLAY
The VCR operating mode can be shown on the screen while you are
playing back a tape or watching a broadcast on the video channel.
Preparations
.
Have the TV on and tuned to the video channel or video input mode,
(See page 22.)
● Check the OUTPUT system indicator (NTSC) lights. If not, press the
OUTPUT SYSTEM (NTSC) button. (See page 42.)
ON-SCREEN DISPLAY ITEMS ❑
@Operatingmode indicator
Current tape operation is shown with following marks:
b:
UREW :
A:
●IILP :
Op>:
Play
Rewind
Cassette out
Recording pause,
tape speed (This
mark signifies to
pause
in LP
recording mode.)
Fast forward/rewind
in counter memory
mode (This mark
signifies to fast
forward.)
@Channel
position
@Cassette-in indicator
@) Linear tape counter
4+P : Function memory
(This mark signifies
to playback after
rewinding.)
- FF : Fast forward
■
: stop
●SP : Recording, tape
speed
M-1 : Index search, count
number
TO DISPLAY INDICATORS ❑
Press the COUNTER DISPLAY button.
Each time pressing, the screen changes as illustration.
(l)AUTO display
When the VCR operation mode is changed, the affected indicator are
displayed in the areas for 5 seconds.
During index search or function memory, an indicator is shown.
(2) COUNTER display
Tape counter is continuously displayed, Other indicators are
displayed as in AUTO display.
(3)FULL display
All indicators (areas) are displayed.
(4) Display off
All indicators disappears.
. When the VCR power is interrupted for more 3 minutes, the on-screen
function display is set to the AUTO screen.
● When you record a video signal output from this unit or another VCR,
set the on-screen function display off. (If the mode indicator is
displayed on the screen, it is also recorded on the tape.)