Operation Manual

----- . . . . . -— ---- —--— ------
68
1
REC
SYSTEM
B
k)
N%c
‘3
PA. ..
,,,..,. ,..<,.
... .. ‘!
;
:.
.. J’
2
—REC /QTR—
I
in. nn
Iu. uu
QUICK TIMER RECORDING
Quick timer recording (QTR) lets you immediately start recordirwg the
current channel for a selectable amount of time. Do this procedure on the
remote control.
Preparations
● Select the channel to record.
● Inserf a cassette with its erasure prevention tab intact.
● Select the tape speed for recording, (See page 62.)
. Set the COLOR SYSTEM setting to “ALI1-O or to the color system of
the input source. (See page 30.)
1
2
3
Press the REC SYSTEM (NTSC, PAL) buttcm to
sdecit the
color system for rf?cording.
Press the NTSC button fc]r recording using the N’TSC system. For
using the PAL system press the PAL button.
For details, see “SEITINIG THE REC SYSTEM” on page 44,,
Press the. REC/GITFl buttons simultaneously.
~appears and recording starts.
Press
● REC/QTR buttons again.
~and “-:--” blink.
Within 5 seconds, presstheO RECIQTR buttons repeatedly
to set the recording time.
As ● REC/QTR buttons are pressed, the recording duration ~)
increases in 30-minutes increments up “to4 hours.
If
● REC/QTR buttons are pressed after “4:O0,~~disappear:s and
the current time is shown on the display, Then the unit records in the
regular recording mode.
r
–:–– + 0:30 + 1:00 + 1:30-
current time - 4:00 e- 3:30 +--
1
The recording time indicator decreases a:s the recording progresses.
When “0:00 is reached, the recording stops, and the power turns off.
To stop a quick timer recording
Press the ■ STOP, II PAU.SEYSTILL, or PC)WER button. The recording
stops or pauses, or the power turns off.
. The channel cannot be chalnged during the QTR recording. Pause the
recording to change the channel.
● A QTR recording takes priority over a timer program recc)rding and
cancels it.