Operating instructions

MUSIC SENSOR
Ifthere isa 4-second orlongerblankbetweeneach track, a search
for the beginning of the current or next trackduring playback can
be done easily.
Press _ or _ during playback referringto the playback side
indicator (41 or _') on the display.
Forexample,when I_ is pressed while I_ is displayed,playback
of the next track starts.
Music sensor function may not be able to detect tracks under the
following conditions:
• Blanks of less than 4 seconds between tracks
• Noisy blanks
• Long passages of low-end sound
• Low overall recording levels
f
About cassette tapes
• To prevent accidental erasure, break off the plastic tabs
on the cassette tape after recording with a screwdriver or
other pointed tool,
- I :Ye ecllo,n Pe __mab fors,deA t
L sot "J
To record on the tape again, cover the tab openings with
adhesive tape, etc. (On Type 11tapes, take care not to cover
the Type 11tape detection slot.)
• 120-minute or longer tapes are extremely thin and easily
deformed or damaged. They are not recommended.
• Take up any slack in the tape with a pencil or similar tool
before use. Slack tape may break or jam in the mechanism.
After playback on one deck finishes, the tape in the other deck
will start to play without interruption.
1 Insert tapes into deck 1 and deck 2.
2 Press TAPE/DECK 1/2 to select the deck to be
played back first.
3 Press REV MODE (DECK 2) to select 7-).
4 Press <11_ to start playback,
Playbackcontinuesuntil• ispressed,