Manual

RECORDING
Al EDIT RECORDING
To stop recording in the middie
Press the ■ / ii: button on deck 1.
Deck operation and CD play stop simultaneously.
To ciear the editing contents
Press the ■ CLEAR button twice in the stop mode so that the red
line surrounding “Al EDIT” in the display goes out, or press the ±
OPEN/CLOSE button.
□
OCJ
OOCJ
oo<^
O ■'
OIiR
To check the editing contents
Before recording, press the DISPLAY button on the remote control
while pressing the SHIFT button.
Each time it is pressed, the contents of each side of the tape are
displayed in turn. -> See illustration 0 .
DISPLAY
© Remaining time of tape to be recorded on
(D Tape side
@ Total number of programmed tracks
@ Programmed track numbers
To check the order of the programmed track numbers
Before recording, press the ►► UP or ◄◄ DOWN button repeat
edly.
Each time it is pressed, the track number and programmed number
are displayed in order, -r See illustration B .
DISPLAY
@ Order of the tracks to be played
@ Number of programmed tracks
@ Programmed track numbers
To add tracks to the edited contents
If the remaining time is enough to record some tracks in step 6, you
can add tracks from other discs in the compartment before record
ing starts.
1 Press the DISPLAY button while pressing the SHIFT button to
select side A or B.
2 Press one of the DISC DIRECT PLAY buttons to select a disc.
3 Press the numeric buttons to select tracks.
If the playing time of a selected track is longer than the tape
remaining time, it is not added.
4 Repeat steps 2 and 3 for adding more tracks.
Time on cassette tapes and editing time
Cassette recording times are usually a little longer than the times
printed on their labels. This unit can program tracks to use the extra
time, when the total time is a little longer than the tape’s rated time.
When the total recording time becomes longerthan the tape’s rated
time after editing, the display shows the extra time (without a minus
mark), instead of the time remaining on the tape (with the minus
mark).
42