Service manual

B1-2
DISASSEMBLY INSTRUCTIONS
1-5: DECK SHIELD PLATE (Refer to Fig. 1-5)
1.
2.
3.
4.
5.
Remove the 2 screws 1.
Remove the 2 screws 2.
Remove the Deck Shield Plate in the direction of arrow (A).
Remove the screw 3.
Remove the Shield Plate Bottom in the direction of arrow (B).
Syscon PCB
(A)
Deck Holder
Fig. 1-7
3
3
(B)
2
2
Jack Plate
1
1.
2.
3.
4.
5.
Remove the screw 1.
Remove the Syscon PCB in the direction of arrow (A).
Remove the 2 screws 2.
Unlock the 2 supports 3.
Remove the Jack Plate in the direction of arrow (B).
1-7: JACK PLATE AND SYSCON PCB (Refer to Fig. 1-7)
1
Fig. 1-6
1
1
Deck Shield Plate
VCR Block
(B)
(A)
3
2
Fig. 1-5
1-6: DECK CHASSIS (Refer to Fig. 1-6)
1.
2.
3.
Remove the 3 screws 1.
Disconnect the following connectors:
(CP1004, CP1005, CP1006, CP4001, CP4004 and
CP4005).
Remove the Deck Chassis in the direction of arrow.
Shield Plate Bottom
Deck Chassis
Syscon PCB
1
1
2