4-247-475-21 030108AMI-H-B Micro Hi-Fi Component System XR-EM200
PRECAUTIONS WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. On operating voltage Before operating the system, check that the operating voltage of your system is identical with the voltage of your local power supply. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.
On heat buildup •Although the unit heats up during operation, this is not malfunction. •Place the unit in a location with adequate ventilation to prevent heat build-up in the unit. If you continuously use this unit at a large volume, the cabinet temperature of the top, side and bottom rises considerable. To avoid burning yourself, do no touch the cabinet.
PREPARATIONS 2 Connect the supplied antennas. Connection Plug in the AC power cord to the AC power socket after all other connections are made. Connect the FM antenna to the FM 75 Ω terminal and the AM antenna to the AM jack. 1 Connect the speakers to the main unit. Remote commander Detach the battery compartment lid at the rear of the remote commander and insert two R6 (size AA) batteries with correct polarity.
PARTS AND CONTROLS Main unit: front Refer to the pages indicated in parentheses for details. 1 2 Main unit: rear Refer to the pages indicated in parentheses for details. 4 TUNER/BAND (7, 10) Selects tuner function and the tuner band. 5 6 7 cTAPE (REC MUTING) (7, 12, 13) Starts playback. Also used to enter 4-second blank spaces during recording. 1 8 AUX (7) Selects the function of external equipment connected to AUX IN jacks. 4 3 1 POWER 6STANDBY/ON (7) Switches the unit on and off (standby).
Remote commander Refer to the pages indicated in parentheses for details. 1 8 9 0 ! @ # Buttons with the same or similar names on the main unit basically have the same function. 1 POWER (7) 2 1–10/0, >10 (8-10) CD: selects a track of the specified number. Tuner: tunes in the station with the specified preset number. The numbered buttons take on these functions when pressed with SHIFT held down: CLOCK (7) Selects clock mode. TIMER (14) Selects timer mode.
ADJUSTMENTS BEFORE OPERATION POWER 6STANDBY/ON ECO ECD, TUNER/ BAND, cTAPE, AUX POWER f,g ECD, TUNER/ BAND, dTAPE, AUX Setting the clock 1 In stop mode, hold down SHIFT and press CLOCK on the remote. CLOCK Go to step 3 when the hour of the clock display flashes. ENTER f,g SHIFT DIMMER Power ECO mode Turning the unit on Press POWER 6STANDBY/ON (POWER on the remote ). Alternatively, press cTAPE, TUNER/BAND, AUX or ECD. Playback will start automatically if a disc or tape is loaded.
CD OPERATIONS Shuffle play OPEN In shuffle play mode the unit plays all the tracks in random order. 1–10/0, >10 ECD DISPLAY s f,g SHUFFLE/ PROGRAM REPEAT ECD CLEAR ENTER f,g s DISPLAY This unit plays back finalized CD-R/RW discs as well as audio CDs. To select a track Press f or g repeatedly . Playing a CD To search (playback in fast forward or reverse) Hold down f or g. Release at the desired point. 1 Press OPEN to open the disc compartment.
Programmed play Plays back up to 30 selected tracks in programmed order. To clear a track Press CLEAR on the remote. Each time you press the button, a track is cleared from the end of the program. 1 In stop mode, press SHUFFLE/PROGRAM on the remote repeatedly so that "PRGM" indicator is displayed. To clear the entire program Press s in stop mode. 2 Press the numbered buttons on the remote to program a track. To add tracks to the program Repeat step 2 before starting playback.
TUNER OPERATIONS Tuning in preset stations 1 Select the band. TUNER/ BAND TUNER MODE f,g TUNER/ BAND SHIFT 1–10/0, >10 CLEAR PRESET N,M, f,g, ENTER Manual tuning Preset tuning 1 Press TUNER/BAND repeatedly to select a band. Preset up to 32 of your favourite stations and tune them in directly. The unit switches to the tuner from any other function and alternates between FM and AM. 2 Press f or g repeatedly to tune in a station. "TUNE" is displayed when a station is tuned in.
SOUND ADJUSTMENTS Adjustments To switch to monaural FM reception Hold down SHIFT and press TUNER MODE on the remote so that "MONO" is displayed. To cancel, repeat the above so that "STEREO" is displayed. MUTING VOLUME TONE f,g Tip: When FM stereo reception is poor, switching to monaural reduces noise. f,g TREBLE, BASS VOLUME +,- Volume Bass and treble Turn VOLUME (press VOLUME +,- on the remote). Adjust from 0 (minimum) to 26 and MAX (maximum).
TAPE PLAYBACK Notes on cassettes SYNCHRO REC REC START/ PAUSE f,g cTAPE (REC MUTING) AUX s zPUSH EJECT dTAPE f,g s SHIFT Playback Use only type I (normal) tapes. 1 Press zPUSH EJECT to open the cassette holder. 2 Insert the tape. Insert with the exposed side down, and press zPUSH EJECT to close the cassette holder. To stop playback Press s. To rewind or fast forward Press f or g. To reset the tape counter Press s in stop mode, and the tape counter in the display is reset to "0000".
TAPE RECORDING To record a CD Use only type I (normal) tapes. To record radio programs and external equipment 1 Press zPUSH EJECT to open the cassette holder. Use only type I (normal) tapes. 2 Insert the recordable tape. 1 Press zPUSH EJECT to open the cassette holder. Insert with the exposed side down, and the side to be recorded on first facing out from the unit. Press zPUSH EJECT to close the cassette holder. 3 Press FUNCTION on the remote repeatedly to select the CD function, and load the disc.
TIMER OPERATIONS 7 Press f or g to select the source (CD, TAPE and TUNER), and press ENTER. POWER 8 Prepare the source. TIMER POWER 6STANDBY/ON VOLUME CLEAR f,g ENTER f,g SHIFT VOLUME +,- SLEEP Sleep timer Timer playback Turns off the unit automatically after a specified time. Turns on the unit at a specified time for the specified duration. Make sure the clock is set correctly. Press SLEEP on the remote. "SLEEP" flashes in the display.
Timer recording Timer recording is available only for TUNER sources. 1 Hold down SHIFT and press TIMER on the remote repeatedly so that "5" and "REC" are displayed. 2 Within 6 seconds, press ENTER. "ON TIME" is displayed. 3 Press f or g to set the timer start hour, and press ENTER. 4 Press f or g to set the minute, and press ENTER. "OFFTIME" is displayed. 5 Set the time to stop recording by following the same procedure as steps 3 and 4.
REFERENCE Care and maintenance Troubleshooting Occasional care and maintenance of the unit and the software are needed to optimize the performance of your unit. If your unit fails to perform properly, check the following guide and the relevant sections of the Operating Instructions. First check that the AC power cord and the speakers are connected correctly and firmly. Should any problem persist, consult your nearest Aiwa dealer. To clean the cabinet Use a soft and dry cloth.
CD player The sound drops out. •The lens is dirty. Clean it with a commercially available blower. The CD does not play. •The CD is not lying flat in the disc compartment. •The CD is dirty. •The CD is inserted label side down. •Moisture condensation has built up. Remove the CD and leave the system turned on for about an hour until the moisture evaporates. Poor tape sound. •Use TYPE I (normal) tapes. Speakers Sound comes from one channel or unbalanced left and right volume occurs.
SPEAKER SYSTEM SX-LEM200 Specifications Speakers system MAIN UNIT CX-LEM200 TUNER FM tuning range FM usable sensitivity (IHF) FM antenna terminal MW tuning range AM usable sensitivity AM antenna 87.5 MHz to 108 MHz 16.8 dBf 75 ohms (unbalanced) 531 kHz to 1602 kHz 350 µV/m Loop antenna AMPLIFIER Power output Input Outputs Rated: 8 W + 8 W(6 Ω, T.H.D. 1 %, 1 kHz/DIN 45500) Reference: 10 W + 10 W(6 Ω, T.H.D.
Sony Corporation Printed in China http://www.aiwa.
