Operation Manual

13
En
Adjustments
To switch to monaural FM reception
Hold down SHIFT and press MONO on the remote control
so that "MONO" is displayed. To cancel, press again to
display "STEREO".
Tip:
When FM stereo reception is poor, switching to monaural
reduces noise.
To switch the AM tuning interval
The default setting of the AM tuning interval is 10 kHz/step. If
you use this unit in an area where the frequency allocation
system is 9 kHz/step, change the tuning interval.
Hold down a and press power on the main unit.
Tip:
When the AM tuning interval is changed, all preset stations
are cleared.
TIMER OPERATIONS
Sleep timer
Turns off the unit automatically after a specified time.
1 Press sound/timer repeatedly.
"SLEEP" is displayed.
2 Push the dial left (f) or right (g) (press
f or g on the remote control) repeatedly
to set the sleep timer duration.
With each push (press), the timer duration changes in 5-
minute steps between 5 to 240 minutes. If there is no
operation for 4 seconds, the current setting is entered
automatically.
The unit turns off after the selected time.
To check the remaining time until the unit turns off
Press sound/timer repeatedly. The remaining time is
displayed for 7 seconds.
To cancel the sleep timer
1 Press sound/timer repeatedly so that "SLEEP" is
displayed.
2 Push the dial left (f) or right (g) (press f or
g on the remote control) until "SLEEP oFF" appears
and the "SLEEP" indicator disappears from the display.
Timer playback
Turns on the unit at a specified time for the specified duration.
Make sure the clock is set correctly.
1 Press sound/timer repeatedly to display "5".
2 Push the dial left (f) or right (g) so that
"5 PLAY" is displayed.
If there is no operation for 7 seconds, setting is canceled.
3 Press enter/color.
If there is no operation for 7 seconds, setting is canceled.
"5" lights up. The timer-on time and the source name
along with the timer-activated duration appear alternately
on the display.
sound/
timer
POWER
aset
enter/clear,
f,g
power
6standby/on
function
f,g
aPAUSE