Owner's manual
SETTING A NEW EQUALIZATION CURVE
MANUALLY
MEMORIZING THE NEW EQUALIZATION
CURVES
1,2 3
l= 11
The equalization curve can be customized to suit your preference.
1 Press FREQ DOWN or FREQ UP.
2 Within 4 seconds, press FREQ DOWN or FREQ
UP repeatedly to select the frequency you want
to adjust.
The selected frequency indicator flashes for 4 seconds.
3 W^ithin 8 seconds, turn MULTI JOG to adjust the
level of the selected frequency.
4 Repeat steps 2 and 3 to complete the equalization
curve.
To cancel the graphic equalizer
Press GEQ once or twice so that ” GEQ OFF” appears on the
display of the stereo receiver.
When using the remote control, press GEQ repeatedly until ”GEQ
OFF” is displayed.
Up to 5 customized equalization curves can be stored as the
manual modes M1 - M5.
1 Set a new equalization curve with FREQ DOWN,
FREQ UP and MULTI JOG.
See “SETTING A NEW EQUALIZATION CURVE MANUALLY”.
The created curve is displayed for 8 seconds.
M2
M2
=€1
iillilliil«
1*
2 Within 4 seconds, press ENTER.
“M 1” indicator flashes on the display for 4 seconds.
* ■ *
I
iiHi
lii
GC
111
N
□
<
3
o
UJ
o
£
a.
<
a
a
• If this step is not completed within 4 seconds, press GEQ
first to display “GEQ ON”. Then press ENTER within 4
seconds.
3 Within 8 seconds, turn MULTI JOG to select one
of the manual modes M1 - MS to store the curve.
4 Within 8 seconds, press ENTER.
The new equalization curve is stored.
To select the stored equalization curve
Press GEQ, and turn MULTI JOG to select one of the manual
modes M1 - M5 within 4 seconds.
ENGLISH 11