CD Stereo System XR-TC80 U OPERATING INSTRUCTIONS En (English) MANUAL DE INSTRUCCIONES E (Español) MODE D'EMPLOI F (Français) C Owner’s record For your convenience, record the model number and serial number (you will find them on the rear of your set) in the space provided below. Please refer to them when you contact your Aiwa dealer in case of difficulty. Model No. Serial No. (Lot No.
IMPORTANT SAFETY INSTRUCTIONS WARNING To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. En Read the Operating Instructions carefully and completely before operating the unit. Be sure to keep the Operating Instructions for future reference. All warnings and cautions in the Operating Instructions and on the unit should be strictly followed, as well as the safety suggestions below.
TABLE OF CONTENTS Outdoor Antenna Lightning Power lines - An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
PREPARATIONS Connection Plug in the AC power cord to the AC outlet after all other connections are made. 1 Connect the speaker cords to the speakers. Connect the copper cords to the + terminals and the silver cords to the – terminals. En 3 Connect the supplied antennas. Connect the FM antenna to the FM 75 Ω terminals and the AM antenna to the AM LOOP jack. Connect the FM antenna to the FM 75 Ω terminal with the mark, as illustrated.
PARTS AND CONTROLS Main unit f/r, t/g (TUNING -, +) CD: skips to a previous or a succeeding track when pressed, searches a track in fast forward or reverse playback when held down. Radio: manually tunes up or down within the band. 6 1 7 0 ! 2 @ # 3 8 4 5 9 1 ECO/DIMMER Selects ECO mode and dimmer mode. TONE Adjusts the bass or treble level. SET Determines the mode. Stores the received station to preset. DISPLAY Changes the display in CD playback mode.
The numbered buttons take on these functions when pressed with SHIFT held down: Remote control 1 8 TUNER MODE Switches between stereo or monaural FM reception. 2 En 3 4 9 # TIMER Selects timer mode. 7 # AUX 2 0–10, +10 CD: selects a track of the specified number. Radio: tunes in the station with the specified preset number. ! f/r, t/g PROGRAM Selects programmed CD playback mode.
ADJUSTMENTS BEFORE OPERATION When operating while the power is on 1 Press ECO/DIMMER once and press SET. SET ECO/DIMMER DISC DIRECT PLAY 1-3 POWER 6STANDBY/ON TUNER/ AUX DEMO/ PRESET CDE POWER DISC DIRECT PLAY 1-3 SET 2 Within 6 seconds, press f or g to select the desired mode and press SET. CDE,AUX TUNER/BAND f,g f,g Standby power consumption ECO ON: 0.
CD OPERATIONS To stop play Press s. DISPLAY 0–10, +10 DISC DIRECT PLAY 1-3 En zOPEN/CLOSE RANDOM/ REPEAT CDE PROGRAM s DISPLAY f,g This unit plays back finalized CD-R/RW discs as well as audio CDs. Playing CDs 1 Press zOPEN/CLOSE to open the CD window and load disc(s). Fit the disc center hole to the pivot of the tray with the label side facing you and press down the part around the hole until the disc is securely locked.
Random/Repeat play Programmed play In random play mode the unit plays all the tracks in random order. In repeat play mode it repeatedly plays all the discs or the track being played. You can select random and repeat all play at the same time. Up to 30 tracks can be programmed from any of the loaded discs. 1 Press RANDOM/REPEAT repeatedly on the remote control. The mode changes as follows: "" 1": Plays one track repeatedly. Select the track with f or g. """: Plays all the tracks repeatedly.
RADIO OPERATIONS TUNER MODE SET TUNER/AUX BAND DEMO/ PRESET En s POWER f,g 0–10, +10 s TUNER/BAND SET PRESET +,f,g SHIFT Manual tuning Preset tuning 1 Press TUNER/AUX / BAND (TUNER/BAND on the remote control) repeatedly to select a band. Preset up to 32 of your favourite stations and tune them in directly. The unit switches to the radio from any other function and alternates between FM and AM. 2 Press f or g repeatedly to tune in a station. "TUNE" is displayed when a station is tuned in.
SOUND ADJUSTMENTS Adjustments To switch to monaural FM reception Hold down SHIFT and press TUNER MODE on the remote control so that "MONO" is displayed. To cancel, repeat the above so that “STEREO” is displayed. TONE VOLUME -,+ Tip: When FM stereo reception is poor, switching to monaural reduces noise. To switch the AM tuning interval The default setting of the AM tuning interval is 10 kHz/step.
TIMER OPERATIONS Sleep timer SET POWER TUNER/ AUX VOLUME -,+ En DISC DIRECT PLAY 1-3 POWER 6STANDBY/ON CDE s f,g Setting the clock 1 Hold down SHIFT and press CLOCK on the remote control. When the unit is turned off, you can also press SET. 2 Within 6 seconds, press f or g to set the time. Each press changes the time in 1-minute steps. Holding these buttons down will vary the time in 10-minute units. 3 Press SET. The time display stops flashing and the clock starts from 00 seconds.
Timer playback Turns on the unit at a specified time for the specified duration. Make sure the clock is set correctly. 1 Press TIMER on the remote control. "5" lights up and "5 PLAY" is displayed. 2 Within 12 seconds, press SET. 3 Press f or g to set the timer-on time, and press SET. Each press changes the time in 1-minute steps. Holding these buttons down will vary the time in 10-minute units. 4 Press f or g (TUNER/AUX or CDE ) to select the source, and press SET. •For timer play of a CD, select "CD".
REFERENCE Care and maintenance Occasional care and maintenance of the unit and the software are needed to optimize the performance of your unit. En To clean the cabinet Use a soft and dry cloth. If the unit surfaces are extremely dirty, use a soft cloth lightly moistened with mild detergent solution. Do not use strong solvents such as alcohol, benzine or thinner. Care of CDs When a CD becomes dirty, wipe it from the center out with a cleaning cloth. After playing a CD, store it in its case.
GENERAL Specifications MAIN UNIT CX-LTC80 TUNER FM tuning range FM usable sensitivity (IHF) FM antenna terminal AM tuning range AM usable sensitivity AM antenna 87.5 MHz to 108 MHz 13.2 dBf 75 ohms (unbalanced) 530 kHz to 1710 kHz (10 kHz step) 531 kHz to 1602 kHz (9 kHz step) 350 µV/m Loop antenna Total harmonic distortion Input Outputs 16 W + 16 W (40 Hz - 20 kHz, THD less than 1 %, 6 ohms) 20 W + 20 W (1 kHz, THD 10 %, 6 ohms) 0.
NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
