Operation Manual

11
En
Adjustments
To switch to monaural FM reception
Hold down SHIFT and press TUNER MODE on the remote
control so that "MONO" is displayed.
To cancel, repeat the above so that “STEREO” is displayed.
Tip:
When FM stereo reception is poor, switching to monaural
reduces noise.
To switch the AM tuning interval
The default setting of the AM tuning interval is 10 kHz/step. If
you use this unit in an area where the frequency allocation
system is 9 kHz/step, change the tuning interval.
Hold down DEMO/PRESET and press POWER on the main
unit when the radio function is selected.
Tip:
When the AM tuning interval is changed, all preset stations
are cleared.
SOUND ADJUSTMENTS
Volume
Press VOLUME -,+.
Adjust from 0 (minimum) to 30 and MAX (maximum).
Tip:
Volume level setting is retained during power-off standby. If
the unit is turned off with the volume set to 17 or higher, it is
automatically turned down to 16 the next time the unit is turned
on.
Bass and treble
1 Press TONE repeatedly to display “BAS” or “TRE.
2 Within 6 seconds, press VOLUME -,+ (f
or g).
The bass or treble level can be adjusted from “–2” to “+5”.
• If the sound becomes distorted, lower the level.
f,g
TONE
f,g
TONE
VOLUME +,-
VOLUME -,+