Sizing Guide

Mobile Home Door
Door is prepped for lockset
by boring a 2-1/8″ diameter
hole at a 2-3/4″ backset with
a 1″ edge bore
Flush design-rolled edges for
style, strength and corrosion
resistance
1-3/4″ thick door pressure
injected with a polyurethane
foam core with an R-12
insulating value
Heavy extruded aluminum
reinforcing for lock set
Top and bottom sill sweeps are
fabricated of a dual durometer vinyl
consisting of three flexible wands
and rigid base
Aluminum stile of door is
reinforced for added strength
Aluminum 1/2″ code
approved low profile
threshold
3-1/2″ Aluminum
frame
Polyurethane foam core
guaranteed not to swell,
delaminate or warp
Available Widths
28″ 30″ 32″ 34″ 36″ 38″
28-1/16″ 30-1/16″ 32-1/16″ 34-1/16″ 36-1/16″ 38-1/16″
Available Heights
68″ 70″ 72″ 74″ 76″ 78″ 80″
68-7/8″ 70-7/8″ 72-7/8″ 74-7/8″ 76-7/8″ 78-7/8″ 80-7/8″
Example:
If the Existing Opening is 35″x 75″, order a 34″ x 74″ door.
Distributed by: Menards, Inc.
Series 3100
standard jamb
Series 3125
nailing fin jamb
Aluminum frame header
with woven
polypropylene pile
Snap in header parting stop
for maximum weatherseal
Aluminum frame header
AJ Manufacturing, Inc
Bloomer, WI
www.ajdoor.com
Manufactured by: AJ Manufacturing, Inc.
AJ-MHD
S E R I E S 3 1 0 0 & 3 1 2 5
W I T H 3-1/2” F R A M E D E P T H
1-1/4″ Nailing fin
Order doors based on the guest’s Rough Opening Size.
1. Remove the trim of existing door.
2. Measure width and height of rough opening or door jamb.
3. Compare width and height of existing door to A.J. offering.
4. Select closest door that is under the size of current
door dimensions.
Width of Rough Opening or necessary width to allow
for door and jamb installation
Height of Rough Opening or necessary width to allow
for door and jamb installation